Can you check in the dump ?
Goto Internal notes in your dump and tell the value.
No more XXXXXXX bytes could be allocated for the sorting.
Divyanshu
↧
Re: MAIN_SHDCRE/SUBMOD_SHDDBCLONE/ADJUSTCHK_EHPI - EXSORT_NOT_ENOUGH_MEMORY
↧
Re: MAIN_SHDCRE/SUBMOD_SHDDBCLONE/ADJUSTCHK_EHPI - EXSORT_NOT_ENOUGH_MEMORY
No more 8388608 bytes could be allocated for the sorting.
This is correct as per note 193529 .
System tries to allocate 8MB chunks from heap memory. But question is why it not able to access heap memory because ST02 still shows Heap available even after reducing the nondia
Regards
SS
↧
↧
Re: MAIN_SHDCRE/SUBMOD_SHDDBCLONE/ADJUSTCHK_EHPI - EXSORT_NOT_ENOUGH_MEMORY
Hi,
I think this could be because of the kernel, as this all is now taken care by the kernel itself. May be an update to current level may solve the problem.
Also, what the maximum heap size per process ?
Can you check this "memlimits -v off".
We cannot run this DIALOG.
Refer: 789477 - Large extended memory on AIX (64-bit) as of Kernel 6.20
May be some adjustment might work.
Regards,
Divyanshu
↧
Re: MAIN_SHDCRE/SUBMOD_SHDDBCLONE/ADJUSTCHK_EHPI - EXSORT_NOT_ENOUGH_MEMORY
Update the SAP kernel to 720 EXT version and repeat the phase in SUM.
Regards
RB
↧
Re: EHP7 upgrade in PREP_INIT/JOB_RSUPDTEC
If the background job RSUPDTEC failed then check the work process trace file of the failed background process.
If possible stop SUM and restart the SAP system. Start SUM and repeat.
Regards
RB
↧
↧
Re: MAIN_SHDCRE/SUBMOD_SHDDBCLONE/ADJUSTCHK_EHPI - EXSORT_NOT_ENOUGH_MEMORY
Hi,
Please share kernel details and if possible try to upgrade the kernel to the latest available as already suggested by Reagan Benjamin and retry the phase .Meanwhile follow SAP Notes 1563583 - SYSTEM_NO_TASK_STORAGE, DBIF_RSQL_NO_MEMORY, EXSORT_NOT_ENOUGH_MEMORY
1147109 - Heap memory shortage
323816 - AIX: User limit settings
Hope this will help you.
Regards,
Gaurav
↧
Re: MAIN_SHDCRE/SUBMOD_SHDDBCLONE/ADJUSTCHK_EHPI - EXSORT_NOT_ENOUGH_MEMORY
Hi All.,
Thanks for the inputs. Our kernel is 720_REL sp401. Kernel upgrade is last option.
Gaurav I had already checked the notes suggested by you but no success.
But I checked the below and felt that some parameters setting should help in this.
Batchjob 'RSUMOD01' aborted in EHP4 Upgrade( ADJUSTCHK_PRE! )
I have opened this with SAP and will update the thread accordingly.
Meanwhile if someone has any other inputs then please share.
Regards
SS
↧
Re: EHP7 upgrade in PREP_INIT/JOB_RSUPDTEC
Hi,
I have tried most of these notes but they are not relevant.
Thanks
↧
Re: EHP7 upgrade in PREP_INIT/JOB_RSUPDTEC
Hi Anshul,
Login to UEQ of nr=00 check work process log file based job id 17574300, and check whether job exhausted with memory, or any error. Please paste the log file.
Regards
KSK
↧
↧
Re: MAIN_SHDCRE/SUBMOD_SHDDBCLONE/ADJUSTCHK_EHPI - EXSORT_NOT_ENOUGH_MEMORY
Hi SS,
Can you please check SHMMIN, SHMMAX, SHMMNI or SHMSEG values which may also cause problems.
Please paste values.
Regards
KSK
↧
Re: MAIN_SHDCRE/SUBMOD_SHDDBCLONE/ADJUSTCHK_EHPI - EXSORT_NOT_ENOUGH_MEMORY
Hi KSK,
Thanks for reply. Please see below values. I hope you were asking the same. Let me know if you need something else.
ES/SHM_DISC_BLK_MIN = 0
ES/SHM_DISC_SEG_MIN = 10
ES/SHM_DISC_BLK_MAX = 4
ES/SHM_DISC_SEG_MAX = 4096
ES/SHM_SYS_FREE_MAX = 20
ES/SHM_DISC_BLOCK_PER_SEG = 2
ES/SHM_DISC_SEG_INIT_CNT = 100
ES/SHM_IDLE_SEGMENT = 10
ES/SHM_MAX_PRIV_SEGS = 15
ES/SHM_MAX_SHARED_SEGS = 1
ES/SHM_PROC_SEG_COUNT = 16
ES/SHM_SEG_COUNT = 8192
ES/SHM_SEG_SIZE = 4096
ES/SHM_USER_COUNT = 8182
rdisp/PG_SHM = 8192
rdisp/ROLL_SHM = 16384
Regards
SS
↧
Re: EHP7 upgrade in PREP_INIT/JOB_RSUPDTEC
Thanks all,
I just checked in AL11,
DIR_PUT is not able to open /SUM/abap
Error:
Wrong order of calls <- CALL opendir: No such file or directory(,,..)
↧
Re: EHP6 Upgrade - Checks after phase MAIN_TRANSEXEC/TABIM_TRANS were negative!
Dear all,
For your information, I have tried setting the deadlock priority, downgrading the tp version, etc. But deadlock will just keep going.
We have used another server for further experiments and our conclusion is: what you need to do is, simply click "Continue" whenever you meet a deadlock. Deadlocks are currently unavoidable.
↧
↧
Re: EHP7 upgrade in PREP_INIT/JOB_RSUPDTEC
Hi Anshul,
Two notes which i asked you to check were pointing to this error only.
You should have checked them before.
Divyanshu
↧
Re: Can I manually import a transport (SPDD) in my shadow instance during the A
If someone read this "unanswered thread" (as I did), maybe you should read :
sap note : 610311 - Importing modification adjustment in second upgrade
and the threads :
SPDD & SPAU transport requests missed in the second system upgrade
↧
Re: "Upgrade is running! No import possible" in ACT_UPG
For this threads, I suggest you to read :
sap note : 610311 - Importing modification adjustment in second upgrade
and the threads :
SPDD & SPAU transport requests missed in the second system upgrade
↧
Severe error(s) occurred in phase PREP_INPUT/SUMCHK!
Hi ,
while performing the EHP7 upgrade during the extraction phase I faced below error.
Severe error(s) occurred in phase PREP_INPUT/SUMCHK!
Last error code set: tp failed with return code 232, check G:\SUM\abap\log\TPSQLSTD.OUT
I have tried implementing the below parameter disp+work is stopped
Env variable rsdb_ssfs_connect = 1
rsdb/ssfs_connect = 0
I have attached the TPSQLSTD log file below,Kindly share your inputs to fix above error.
↧
↧
Re: Severe error(s) occurred in phase PREP_INPUT/SUMCHK!
Hi Krishna,
Can you execute R3trans -d and share trans.log file.
Also, are you using SSFS?
Can you share more traces from log and temp folder.
Divyanshu
↧
Re: Severe error(s) occurred in phase PREP_INPUT/SUMCHK!
Hi Divyanshu,
As requested I have attached the trans.log below .
↧
Re: Severe error(s) occurred in phase PREP_INPUT/SUMCHK!
This is fine, checked
Can you share other logs too.
Divyanshu
↧