Hi Arif,
Did you manage to solve this problem as i have the same problem with my upgrade project.
can you help me
best regards,
Ehab Magdy
Hi Arif,
Did you manage to solve this problem as i have the same problem with my upgrade project.
can you help me
best regards,
Ehab Magdy
Hello Ehab,
It looks like table
PUTTB_SHD
was not created.
Check in se11/se14 if it exists and is active.
Check on db level if it exists.
If not, check the upgrade log directory and search for any errors or mention of the table.
regards,
Paul
Hello
The system log says that the table is missing at the DB level.
Call Tx SE14 and have the table created at the database level.
Also check whether this SAP Note is applicable:
Note 788768 - Problems during upgrade in the phase RUN_RSPTBFIL_DEST
Good Luck
RB
Hi Doug
Get yourself a new "Consultant"
Personally just upgraded a system from 3 to 6 without any major problems.
Also everything that's new in EHP5 will also be in EHP6.
James
Dear all
We get above Error
This trouble ticket was created by SAPup on 20130628101741
-------------------------------------------------------------
SAPup broke during phase VALCHK_INI in module PREP_INIT / Initialization
Error Message: SAP_ABA is in an undefined state, that is not safe to be upgraded, reason Upgrade wasn't completed - Call the SAP Support
-------------------------------------------------------------
-------------------------------------------------------------
Summary of SAPup:
-------------------------------------------------------------
SAPehpi Release:#lmt_008
SAPehpi Version:#SAPup release lmt_008 version 52.000
Start Release:##700
Target Release:##700
-------------------------------------------------------------
Summary of host system details:
-------------------------------------------------------------
SID:###ARD
Host:###sapdevail
MS Host:##sapdevail
GW Host:##sapdevail
Start Path:##/usr/sap/ARD/DVEBMGS00/exe#
Kernel Path:##/usr/sap/ARD/DVEBMGS00/exe
-------------------------------------------------------------
Summary of operating system details:
-------------------------------------------------------------
OS Type:##AIX
OS Version:##5.3.12
-------------------------------------------------------------
Summary of database details:
-------------------------------------------------------------
Database Type:##ora
Database Version:#11.2.0.2.0
-------------------------------------------------------------
Summary of RFC details:
-------------------------------------------------------------
Host:###sapdevail
GW Host:##sapdevail
Client:###000
Destination:##ARD
Language:##E
System No.:##00
-------------------------------------------------------------
-------------------------------------------------------------
Nainesh
9376998808
Hello Nainesh,
Did you reset the upgrade previously?? This only happenes if the previous upgrade run was not resetted correctly.
In which phase , you resetted the upgrade and how ???
Check the Note 1790486. This should be useful.
Regards,
Gaurav
Dear Gaurav
we do following
./SAPup reset prepare
Enter the path of your root directory [/tmp/SUM_AIX/SUM/abap]:
Root directory = /tmp/SUM_AIX/SUM/abap
=========== Resetting procedure ===========
The tool will reset the whole procedure now.
01) - Yes
02) - No
Do you really want to reset the procedure? []: 01
Execution of REVOKE module "Resets initialization module" begins at 20130628112716
>> 2013/06/28 11:27:16 START OF PHASE REV_PRPINIT/RESET_PREPARE
Starting to reset PREPARE.
Integration of change requests was reset.
Using new method to reset stati.
<< 2013/06/28 11:27:16 END OF PHASE REV_PRPINIT/RESET_PREPARE
-- Finished execution of 2/2 phases.
Execution of REVOKE module "Resets initialization module" ends at 20130628112716
=========== Continue Roadmap ===========
Current status: [No modules selected]
This procedure has been reset successfully and you cannot continue it anymore.
For more information, see the tool guide.
You can clean up the tool directory and start all over again.
01) * Exit
02) - Cleanup and start afresh.
[Exit]: 02
Cleaning up directory after procedure reset.
Clearing 20 files from '/tmp/SUM_AIX/SUM/abap/control/dbs/ORA' in '/tmp/SUM_AIX/SUM/abap/bin'
sapdevail:ardadm 8>
It Ok or not
nainesh
Hi,
we have opened a message to SAP and the issue is resolved now. The solution is:
Take a offline backup of the current system and the upgrade directory. Once the backup is there, please then restart the system and run the report RDDIT022N as DDIC user in 000 Client.
Regards,
Mohan.
Hello,
Please open a message to SAP before using the above workaround. Error might not be the same which was faced here. It need to be analysed in the system first.
Regards,
Gaurav
Hi,
the solution above was given by SAP after we have opened a ticket.
Thanks,
Mohan.
Hi Ehab,
please tell us which version of SUM you are using.
It seems that the upgrade procedure didn´t create the table PUTTB_SHD.
This table controls the shadow_import_inc phase during the upgrade. Please double check if this table exists. Please check also the database log, if there are some errors regarding this table.
If there is no newer SUM version for you available, you have to open an OSS message and create the table manually.
Regards,
Jens
Hi Deepak,
I cannot down the SAP because it is on cluster so i have to tack long process for the down system... is any alternative option for the same issue?
If not !!!!!! is this is the root solution for this problem???? so i can talk with my responsible person...
Thanks,
AzIz.
Dear Sheel,
This is SAPupchk.log
But i can't find sapup.log or toolchkupg.lst!!
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup version 7.00/3 patch level 25.026.
# Environment for SAPup:
# SAPSID = PRD
# SAPHOST = MCVPRDDB
# STARTPATH = C:\usr\sap\PRD\SYS\exe\run
# KERNPATH = C:\usr\sap\PRD\SYS\exe\run
# PROFPATH = C:\usr\sap\PRD\SYS\profile
# LOCAL SLOG = C:\usr\sap\PRD\DVEBMGS30\log\SLOG30.LOG
# LOCAL SLOG (OLD) = C:\usr\sap\PRD\DVEBMGS30\log\SLOGO30.LOG
# CENTRAL SLOG =
# CENTRAL SLOG (OLD) =
# EPS INBOX = \\MCVPRDDB\sapmnt\trans\EPS\in
# EPS ROOT = \\MCVPRDDB\sapmnt\trans\EPS
# DBASID =
# DBAHOST = MCVPRDDB
# DBAPWD = <NOT REPORTED>
# NR R3TRANS = 3
# NR R3LOAD = 1
# IMPORT DESTTIME = 86400
# STARTR3 = ""
# STARTPARAMS R3 = ""
# STOPR3 = ""
# STOPPARAMS R3 = ""
# STARTDB = ""
# STARTPARAMS DB = ""
# STOPDB = ""
# STOPPARAMS DB = ""
# UPGRADE USER =
# UPGRADE LANGUAGE = E
# SLOGNAME = SLOG
# ALOGNAME = ALOG
# SYSNUM = 30
# PROFNAME = C:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS30_MCVPRDDB
# DDIC PWD = <NOT REPORTED>
# GATEWAY HOST =
# GATEWAY SERVICE =
# MS INTERNAL SERVICE = 0
# SLOW SHADOW IMPORT = Y
# MAX BUFREFTIME = 120
# BATCH HOST =
# NR BTC-PROCS INTERN = 3
# CUSTOMER GENERATION = 0
# SAP START PROFILE = START_DVEBMGS30_MCVPRDDB
# DEFPROFNAME = C:\usr\sap\PRD\SYS\profile\DEFAULT.PFL
# OSTYPE = Windows NT X86_64
# OSVERS = 5.2
# DESTVERS = 700
# COMPDESTVERS = EA-APPL=600,EA-DFPS=600,EA-FINSERV=600,EA-GLTRADE=600,EA-HR=600,EA-IPPE=400,EA-PS=600,EA-RETAIL=600,ECC-DIMP=600,ERECRUIT=600,FI-CA=600,FI-CAX=600,FINBASIS=600,INSURANCE=600,IS-CWM=600,IS-H=600,IS-M=600,IS-OIL=600,IS-PS-CA=600,IS-UT=600,LSOFE=600,PI_BASIS=2005_1_700,SAP_ABA=700,SAP_AP=700,SAP_APPL=600,SAP_BASIS=700,SAP_BW=700,SAP_HR=600,SEM-BW=600,ST-PI=2005_1_700
# SUBSTSTVERS = 700
# COMPSUBSTSTVERS = SAP_BASIS=700,SAP_ABA=700,SAP_APPL=600,SAP_HR=600,SAP_BW=700
# DESTPRODSHORTID = R/3
# DESTPRODSHORTREL = 700
# IMPORT LANGUAGES =
# DB REPSWITCH PAR = NOT_SPECIFIED
# PARALLEL DDLNTABS = 0
# TABLSIZE = 0
# KERNEL BIT SELECTION = 64 bit, no choice
# SHD INSTANCE NUMBER =
# SHD send d talk port = -1
# SHD send d listen port = -1
# SHD collect d listen port = -1
# SHD collect d talk port = -1
# SHD GW SERVICE =
# SHD MS INTERNAL SERVICE =
# SHD HOST =
# SHD GW HOST =
# SHD STARTPATH =
# SHD R3 START PROFILE =
# SHD PROFILE PATH =
# SHD PROFILE NAME =
# SHD startsap =
# SHD stopsap =
# SHD workpath =
# SHD kernpath =
# dba schema = dbo
# dba shd schema = dbo_shd
# connect env string = dbs_mss_schema
# REMOTE UPGRADE DIRECTORY =
# SAP SERVICE ACCOUNT =
# SAP SERVICE ACCOUNT PWD= <NOT REPORTED>
# Original shadow profile =
*** PREPARE STARTED AT 20130624115202 ***
...begin dialogue at 20130624115202
...end dialogue at 20130624115205
...begin dialogue at 20130624115205
...end dialogue at 20130624115213
...begin dialogue at 20130624115213
...end dialogue at 20130624115217
Execution of PREPARE module Parameter input begins at 20130624115217
UPGRADEPHASE
UPGRADEPHASE BEGIN_PRE
...started at 20130624115217
# Condition level 1, total => FALSE '#if "MSSQL" == "SAPDB"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB2-z/OS"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB2/400"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB6"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "INFORMIX"' => FALSE
# Condition level 1, total => TRUE '#elseif "MSSQL" == "MSSQL"' => TRUE
# Condition level 1, total => FALSE '#if "Windows NT X86_64" ~= "Linux"' => FALSE
# Condition level 1, total => FALSE '#elseif "Windows NT X86_64" ~= "Windows NT INTEL"' => FALSE
# Condition level 1, total => FALSE '#elseif "Windows NT X86_64" ~= "Windows NT IA64"' => FALSE
# Condition level 1, total => TRUE '#elseif "Windows NT X86_64" ~= "Windows NT X86_64"' => TRUE
..finished at 20130624115217 with status SUCCEEDED.
UPGRADEPHASE KEY_CHK
...started at 20130624115217
# Phase log file: 'KEYCHK.LOG'
Correction package found
Correction package extracted
# TOOLFIX VERSION: 58
# TOOLFIX NAME: FIX_ERP2005SR3
# TOOLFIX DATE: 2013-4-16
...begin dialogue at 20130624115220
...end dialogue at 20130624115438
..finished at 20130624115438 with status SUCCEEDED.
UPGRADEPHASE EXTRACTKRN_PRE
...started at 20130624115438
# Phase log file: 'EXTRKRN.LOG'
# Condition level 1, total => FALSE '#if ( "0" == "1" )' => FALSE
# Condition level 1, total => FALSE '#if ( "0" == "1" )' => FALSE
...begin dialogue at 20130624115438
...end dialogue at 20130624115852
# Condition level 1, total => TRUE '#if ("Windows NT X86_64" == "Windows NT INTEL") || ("Windows NT X86_64" == "Windows NT IA64") || ("Windows NT X86_64" == "Windows NT X86_64")' => TRUE
# Condition level 1, total => FALSE '#if "MSSQL" == "ORACLE" ' => FALSE
# Condition level 1, total => TRUE '#if ("Windows NT X86_64" == "Windows NT INTEL") || ("Windows NT X86_64" == "Windows NT IA64") || ("Windows NT X86_64" == "Windows NT X86_64")' => TRUE
# Condition level 1, total => FALSE '#if "MSSQL" == "ORACLE" ' => FALSE
..finished at 20130624120042 with status SUCCEEDED.
UPGRADEPHASE INITPUT_PRE
...started at 20130624120042
...begin dialogue at 20130624120042
...end dialogue at 20130624120125
...begin dialogue at 20130624120125
...end dialogue at 20130624120126
...begin dialogue at 20130624120127
...end dialogue at 20130624120140
...begin dialogue at 20130624120140
...end dialogue at 20130624120142
...begin dialogue at 20130624120142
...end dialogue at 20130624120534
# rdisp/msserv_internal calculated as 3930.
...begin dialogue at 20130624120536
...end dialogue at 20130624120548
...begin dialogue at 20130624120549
...end dialogue at 20130624120601
# Condition level 1, total => FALSE '#if -1 >= 0' => FALSE
# Condition level 1, total => FALSE '#if -1 >= 0' => FALSE
# Environment for SAPup:
# SAPSID = PRD
# SAPHOST = MCVPRDDB
# STARTPATH = C:\usr\sap\PRD\SYS\exe\run
# KERNPATH = C:\usr\sap\PRD\SYS\exe\run
# PROFPATH = C:\usr\sap\PRD\SYS\profile
# LOCAL SLOG = C:\usr\sap\PRD\DVEBMGS30\log\SLOG30.LOG
# LOCAL SLOG (OLD) = C:\usr\sap\PRD\DVEBMGS30\log\SLOGO30.LOG
# CENTRAL SLOG =
# CENTRAL SLOG (OLD) =
# EPS INBOX = \\MCVPRDDB\sapmnt\trans\EPS\in
# EPS ROOT = \\MCVPRDDB\sapmnt\trans\EPS
# DBASID = PRD
# DBAHOST = MCVPRDDB
# DBAPWD = <NOT REPORTED>
# NR R3TRANS = 5
# NR R3LOAD = 1
# IMPORT DESTTIME = 86400
# STARTR3 = "startsap.exe"
# STARTPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STOPR3 = "stopsap.exe"
# STOPPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STARTDB = ""
# STARTPARAMS DB = " "
# STOPDB = ""
# STOPPARAMS DB = " "
# UPGRADE USER = prdadm
# UPGRADE LANGUAGE = E
# SLOGNAME = SLOG700
# ALOGNAME = ALOG700
# SYSNUM = 30
# PROFNAME = C:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS30_MCVPRDDB
# DDIC PWD = <NOT REPORTED>
# GATEWAY HOST = MCVPRDDB
# GATEWAY SERVICE = sapgw30
# MS INTERNAL SERVICE = 3930
# SLOW SHADOW IMPORT = Y
# MAX BUFREFTIME = 120
# BATCH HOST = MCVPRDDB
# NR BTC-PROCS INTERN = 3
# CUSTOMER GENERATION = 0
# SAP START PROFILE = START_DVEBMGS30_MCVPRDDB
# DEFPROFNAME = C:\usr\sap\PRD\SYS\profile\DEFAULT.PFL
# OSTYPE = Windows NT X86_64
# OSVERS = 5.2
# DESTVERS = 700
# COMPDESTVERS = EA-APPL=600,EA-DFPS=600,EA-FINSERV=600,EA-GLTRADE=600,EA-HR=600,EA-IPPE=400,EA-PS=600,EA-RETAIL=600,ECC-DIMP=600,ERECRUIT=600,FI-CA=600,FI-CAX=600,FINBASIS=600,INSURANCE=600,IS-CWM=600,IS-H=600,IS-M=600,IS-OIL=600,IS-PS-CA=600,IS-UT=600,LSOFE=600,PI_BASIS=2005_1_700,SAP_ABA=700,SAP_AP=700,SAP_APPL=600,SAP_BASIS=700,SAP_BW=700,SAP_HR=600,SEM-BW=600,ST-PI=2005_1_700
# SUBSTSTVERS = 700
# COMPSUBSTSTVERS = SAP_BASIS=700,SAP_ABA=700,SAP_APPL=600,SAP_HR=600,SAP_BW=700
# DESTPRODSHORTID = R/3
# DESTPRODSHORTREL = 700
# IMPORT LANGUAGES =
# DB REPSWITCH PAR = NOT_SPECIFIED
# PARALLEL DDLNTABS = 0
# TABLSIZE = 0
# KERNEL BIT SELECTION = 64 bit, no choice
# SHD INSTANCE NUMBER =
# SHD send d talk port = -1
# SHD send d listen port = -1
# SHD collect d listen port = -1
# SHD collect d talk port = -1
# SHD GW SERVICE =
# SHD MS INTERNAL SERVICE =
# SHD HOST =
# SHD GW HOST =
# SHD STARTPATH =
# SHD R3 START PROFILE =
# SHD PROFILE PATH =
# SHD PROFILE NAME =
# SHD startsap =
# SHD stopsap =
# SHD workpath =
# SHD kernpath =
# dba schema = dbo
# dba shd schema = dbo_shd
# connect env string = dbs_mss_schema
# REMOTE UPGRADE DIRECTORY =
# SAP SERVICE ACCOUNT = MCV-EG.COM\SAPServicePRD
# SAP SERVICE ACCOUNT PWD= <NOT REPORTED>
# Original shadow profile =
..finished at 20130624120603 with status SUCCEEDED.
UPGRADEPHASE DBCHK_PRE
...started at 20130624120603
# Condition level 1, total => FALSE '#if -1 >= 0' => FALSE
# Condition level 1, total => FALSE '#if -1 >= 0' => FALSE
# DB Environment for SAPup:
# DBATYPE MSSQL
# DBAHOME C:\Program
# DBAEXE C:\Program\bin
# DBACONN "PRD"
# DBAVERS 9.00.4035
# KERNVERS 620
# SAPVERS 620
# DOKVERS 620
# DBASUBTYPE STANDARD
# DBAOPSYS SAME_SYS
# DBA2CONN ""
# COMPRELS ""ABA_PLUS=100,EA-APPL=200,EA-DFPS=200,EA-FINSERV=200,EA-GLTRADE=200,EA-HR=200,EA-IPPE=200,EA-PS=200,EA-RETAIL=200,PI=2003_1_470,PI_BASIS=2003_1_620,SAP_ABA=620,SAP_APPL=470,SAP_BASIS=620,SAP_HR=470,ST-A/PI=01P_620,ST-PI=2008_1_620""
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
# DB Environment for SAPup:
# DBATYPE MSSQL
# DBAHOME C:\Program
# DBAEXE C:\Program\bin
# DBACONN "PRD"
# DBAVERS 9.00.4035
# KERNVERS 620
# SAPVERS 620
# DOKVERS 620
# DBASUBTYPE STANDARD
# DBAOPSYS SAME_SYS
# DBA2CONN ""
# COMPRELS ""ABA_PLUS=100,EA-APPL=200,EA-DFPS=200,EA-FINSERV=200,EA-GLTRADE=200,EA-HR=200,EA-IPPE=200,EA-PS=200,EA-RETAIL=200,PI=2003_1_470,PI_BASIS=2003_1_620,SAP_ABA=620,SAP_APPL=470,SAP_BASIS=620,SAP_HR=470,ST-A/PI=01P_620,ST-PI=2008_1_620""
# Environment for SAPup:
# SAPSID = PRD
# SAPHOST = MCVPRDDB
# STARTPATH = C:\usr\sap\PRD\SYS\exe\run
# KERNPATH = C:\usr\sap\PRD\SYS\exe\run
# PROFPATH = C:\usr\sap\PRD\SYS\profile
# LOCAL SLOG = C:\usr\sap\PRD\DVEBMGS30\log\SLOG30.LOG
# LOCAL SLOG (OLD) = C:\usr\sap\PRD\DVEBMGS30\log\SLOGO30.LOG
# CENTRAL SLOG =
# CENTRAL SLOG (OLD) =
# EPS INBOX = \\MCVPRDDB\sapmnt\trans\EPS\in
# EPS ROOT = \\MCVPRDDB\sapmnt\trans\EPS
# DBASID = PRD
# DBAHOST = MCVPRDDB
# DBAPWD = <NOT REPORTED>
# NR R3TRANS = 5
# NR R3LOAD = 1
# IMPORT DESTTIME = 86400
# STARTR3 = "startsap.exe"
# STARTPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STOPR3 = "stopsap.exe"
# STOPPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STARTDB = ""
# STARTPARAMS DB = " "
# STOPDB = ""
# STOPPARAMS DB = " "
# UPGRADE USER = prdadm
# UPGRADE LANGUAGE = E
# SLOGNAME = SLOG700
# ALOGNAME = ALOG700
# SYSNUM = 30
# PROFNAME = C:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS30_MCVPRDDB
# DDIC PWD = <NOT REPORTED>
# GATEWAY HOST = MCVPRDDB
# GATEWAY SERVICE = sapgw30
# MS INTERNAL SERVICE = 3930
# SLOW SHADOW IMPORT = Y
# MAX BUFREFTIME = 120
# BATCH HOST = MCVPRDDB
# NR BTC-PROCS INTERN = 3
# CUSTOMER GENERATION = 0
# SAP START PROFILE = START_DVEBMGS30_MCVPRDDB
# DEFPROFNAME = C:\usr\sap\PRD\SYS\profile\DEFAULT.PFL
# OSTYPE = Windows NT X86_64
# OSVERS = 5.2
# DESTVERS = 700
# COMPDESTVERS = EA-APPL=600,EA-DFPS=600,EA-FINSERV=600,EA-GLTRADE=600,EA-HR=600,EA-IPPE=400,EA-PS=600,EA-RETAIL=600,ECC-DIMP=600,ERECRUIT=600,FI-CA=600,FI-CAX=600,FINBASIS=600,INSURANCE=600,IS-CWM=600,IS-H=600,IS-M=600,IS-OIL=600,IS-PS-CA=600,IS-UT=600,LSOFE=600,PI_BASIS=2005_1_700,SAP_ABA=700,SAP_AP=700,SAP_APPL=600,SAP_BASIS=700,SAP_BW=700,SAP_HR=600,SEM-BW=600,ST-PI=2005_1_700
# SUBSTSTVERS = 700
# COMPSUBSTSTVERS = SAP_BASIS=700,SAP_ABA=700,SAP_APPL=600,SAP_HR=600,SAP_BW=700
# DESTPRODSHORTID = R/3
# DESTPRODSHORTREL = 700
# IMPORT LANGUAGES =
# DB REPSWITCH PAR = NOT_SPECIFIED
# PARALLEL DDLNTABS = 0
# TABLSIZE = 0
# KERNEL BIT SELECTION = 64 bit, no choice
# SHD INSTANCE NUMBER =
# SHD send d talk port = -1
# SHD send d listen port = -1
# SHD collect d listen port = -1
# SHD collect d talk port = -1
# SHD GW SERVICE =
# SHD MS INTERNAL SERVICE =
# SHD HOST =
# SHD GW HOST =
# SHD STARTPATH =
# SHD R3 START PROFILE =
# SHD PROFILE PATH =
# SHD PROFILE NAME =
# SHD startsap =
# SHD stopsap =
# SHD workpath =
# SHD kernpath =
# dba schema = dbo
# dba shd schema = dbo_shd
# connect env string = dbs_mss_schema
# REMOTE UPGRADE DIRECTORY =
# SAP SERVICE ACCOUNT = MCV-EG.COM\SAPServicePRD
# SAP SERVICE ACCOUNT PWD= <NOT REPORTED>
# Original shadow profile =
# NO UNICODE. DB factor is: 1
# Phase log file: 'MCODCHK.LOG'
...begin dialogue at 20130624120606
...end dialogue at 20130624120629
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
..finished at 20130624120629 with status SUCCEEDED.
UPGRADEPHASE CONFCHK_IMP
...started at 20130624120629
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
# DB Environment for SAPup:
# DBATYPE MSSQL
# DBAHOME C:\Program
# DBAEXE C:\Program\bin
# DBACONN "PRD"
# DBAVERS 9.00.4035
# KERNVERS 620
# SAPVERS 620
# DOKVERS 620
# DBASUBTYPE STANDARD
# DBAOPSYS SAME_SYS
# DBA2CONN ""
# COMPRELS ""ABA_PLUS=100,EA-APPL=200,EA-DFPS=200,EA-FINSERV=200,EA-GLTRADE=200,EA-HR=200,EA-IPPE=200,EA-PS=200,EA-RETAIL=200,PI=2003_1_470,PI_BASIS=2003_1_620,SAP_ABA=620,SAP_APPL=470,SAP_BASIS=620,SAP_HR=470,ST-A/PI=01P_620,ST-PI=2008_1_620""
# System configuration:
# Operating system = Windows NT X86_64
# Version = 5.2
# Database type = MSSQL
# Version = 9.00.4035
..finished at 20130624120631 with status SUCCEEDED.
UPGRADEPHASE SOLMAN_CHK
...started at 20130624120631
...begin dialogue at 20130624120631
...end dialogue at 20130624120646
...begin dialogue at 20130624120646
...end dialogue at 20130624120656
..finished at 20130624120656 with status SUCCEEDED.
UPGRADEPHASE CHKSYSTYPE
...started at 20130624120656
# Phase log file: 'CHKSYSTYPE.LOG'
# System recognized: is not a final assembly system
..finished at 20130624120657 with status SUCCEEDED.
UPGRADEPHASE HIAV_CHK
...started at 20130624120657
# Phase log file: 'HIAVCHK.LOG'
..finished at 20130624120657 with status SUCCEEDED.
UPGRADEPHASE J2EE_CHK1
...started at 20130624120657
# Phase log file: 'J2EECHK.LOG'
..finished at 20130624120657 with status SUCCEEDED.
UPGRADEPHASE REQ_J2EEUPG
...started at 20130624120657
# Phase skipped due to condition 'J2EE_ONLY'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130624120657 with status SUCCEEDED.
UPGRADEPHASE SETSYNC_PREP_STARTED
...started at 20130624120657
# Phase skipped due to condition 'J2EE_ONLY'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130624120657 with status SUCCEEDED.
UPGRADEPHASE REQ_READNOTE
...started at 20130624120657
# Phase skipped due to condition 'CBU_only'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130624120657 with status SUCCEEDED.
UPGRADEPHASE INIT_CBU
...started at 20130624120657
# Phase skipped due to condition 'CBU_only'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130624120657 with status SUCCEEDED.
UPGRADEPHASE CHECKGROUP_END0
...started at 20130624120657
Execution of PREPARE module Parameter input ends at 20130624120658
Execution of PREPARE module Initialization begins at 20130624120658
UPGRADEPHASE
UPGRADEPHASE INITCURENV
...started at 20130624120658
# Environment for SAPup:
# SAPSID = PRD
# SAPHOST = MCVPRDDB
# STARTPATH = C:\usr\sap\PRD\SYS\exe\run
# KERNPATH = C:\usr\sap\PRD\SYS\exe\run
# PROFPATH = C:\usr\sap\PRD\SYS\profile
# LOCAL SLOG = C:\usr\sap\PRD\DVEBMGS30\log\SLOG30.LOG
# LOCAL SLOG (OLD) = C:\usr\sap\PRD\DVEBMGS30\log\SLOGO30.LOG
# CENTRAL SLOG =
# CENTRAL SLOG (OLD) =
# EPS INBOX = \\MCVPRDDB\sapmnt\trans\EPS\in
# EPS ROOT = \\MCVPRDDB\sapmnt\trans\EPS
# DBASID = PRD
# DBAHOST = MCVPRDDB
# DBAPWD = <NOT REPORTED>
# NR R3TRANS = 5
# NR R3LOAD = 1
# IMPORT DESTTIME = 86400
# STARTR3 = "startsap.exe"
# STARTPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STOPR3 = "stopsap.exe"
# STOPPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STARTDB = ""
# STARTPARAMS DB = " "
# STOPDB = ""
# STOPPARAMS DB = " "
# UPGRADE USER = prdadm
# UPGRADE LANGUAGE = E
# SLOGNAME = SLOG700
# ALOGNAME = ALOG700
# SYSNUM = 30
# PROFNAME = C:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS30_MCVPRDDB
# DDIC PWD = <NOT REPORTED>
# GATEWAY HOST = MCVPRDDB
# GATEWAY SERVICE = sapgw30
# MS INTERNAL SERVICE = 3930
# SLOW SHADOW IMPORT = Y
# MAX BUFREFTIME = 120
# BATCH HOST = MCVPRDDB
# NR BTC-PROCS INTERN = 3
# CUSTOMER GENERATION = 0
# SAP START PROFILE = START_DVEBMGS30_MCVPRDDB
# DEFPROFNAME = C:\usr\sap\PRD\SYS\profile\DEFAULT.PFL
# OSTYPE = Windows NT X86_64
# OSVERS = 5.2
# DESTVERS = 700
# COMPDESTVERS = EA-APPL=600,EA-DFPS=600,EA-FINSERV=600,EA-GLTRADE=600,EA-HR=600,EA-IPPE=400,EA-PS=600,EA-RETAIL=600,ECC-DIMP=600,ERECRUIT=600,FI-CA=600,FI-CAX=600,FINBASIS=600,INSURANCE=600,IS-CWM=600,IS-H=600,IS-M=600,IS-OIL=600,IS-PS-CA=600,IS-UT=600,LSOFE=600,PI_BASIS=2005_1_700,SAP_ABA=700,SAP_AP=700,SAP_APPL=600,SAP_BASIS=700,SAP_BW=700,SAP_HR=600,SEM-BW=600,ST-PI=2005_1_700
# SUBSTSTVERS = 700
# COMPSUBSTSTVERS = SAP_BASIS=700,SAP_ABA=700,SAP_APPL=600,SAP_HR=600,SAP_BW=700
# DESTPRODSHORTID = R/3
# DESTPRODSHORTREL = 700
# IMPORT LANGUAGES =
# DB REPSWITCH PAR = NOT_SPECIFIED
# PARALLEL DDLNTABS = 0
# TABLSIZE = 0
# KERNEL BIT SELECTION = 64 bit, no choice
# SHD INSTANCE NUMBER =
# SHD send d talk port = -1
# SHD send d listen port = -1
# SHD collect d listen port = -1
# SHD collect d talk port = -1
# SHD GW SERVICE =
# SHD MS INTERNAL SERVICE =
# SHD HOST =
# SHD GW HOST =
# SHD STARTPATH =
# SHD R3 START PROFILE =
# SHD PROFILE PATH =
# SHD PROFILE NAME =
# SHD startsap =
# SHD stopsap =
# SHD workpath =
# SHD kernpath =
# dba schema = dbo
# dba shd schema = dbo_shd
# connect env string = dbs_mss_schema
# REMOTE UPGRADE DIRECTORY =
# SAP SERVICE ACCOUNT = MCV-EG.COM\SAPServicePRD
# SAP SERVICE ACCOUNT PWD= <NOT REPORTED>
# Original shadow profile =
..finished at 20130624120658 with status SUCCEEDED.
UPGRADEPHASE DBCHK_INI
...started at 20130624120658
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
# DB Environment for SAPup:
# DBATYPE MSSQL
# DBAHOME C:\Program
# DBAEXE C:\Program\bin
# DBACONN "PRD"
# DBAVERS 9.00.4035
# KERNVERS 620
# SAPVERS 620
# DOKVERS 620
# DBASUBTYPE STANDARD
# DBAOPSYS SAME_SYS
# DBA2CONN ""
# COMPRELS ""ABA_PLUS=100,EA-APPL=200,EA-DFPS=200,EA-FINSERV=200,EA-GLTRADE=200,EA-HR=200,EA-IPPE=200,EA-PS=200,EA-RETAIL=200,PI=2003_1_470,PI_BASIS=2003_1_620,SAP_ABA=620,SAP_APPL=470,SAP_BASIS=620,SAP_HR=470,ST-A/PI=01P_620,ST-PI=2008_1_620""
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
# DB Environment for SAPup:
# DBATYPE MSSQL
# DBAHOME C:\Program
# DBAEXE C:\Program\bin
# DBACONN "PRD"
# DBAVERS 9.00.4035
# KERNVERS 620
# SAPVERS 620
# DOKVERS 620
# DBASUBTYPE STANDARD
# DBAOPSYS SAME_SYS
# DBA2CONN ""
# COMPRELS ""ABA_PLUS=100,EA-APPL=200,EA-DFPS=200,EA-FINSERV=200,EA-GLTRADE=200,EA-HR=200,EA-IPPE=200,EA-PS=200,EA-RETAIL=200,PI=2003_1_470,PI_BASIS=2003_1_620,SAP_ABA=620,SAP_APPL=470,SAP_BASIS=620,SAP_HR=470,ST-A/PI=01P_620,ST-PI=2008_1_620""
# Environment for SAPup:
# SAPSID = PRD
# SAPHOST = MCVPRDDB
# STARTPATH = C:\usr\sap\PRD\SYS\exe\run
# KERNPATH = C:\usr\sap\PRD\SYS\exe\run
# PROFPATH = C:\usr\sap\PRD\SYS\profile
# LOCAL SLOG = C:\usr\sap\PRD\DVEBMGS30\log\SLOG30.LOG
# LOCAL SLOG (OLD) = C:\usr\sap\PRD\DVEBMGS30\log\SLOGO30.LOG
# CENTRAL SLOG =
# CENTRAL SLOG (OLD) =
# EPS INBOX = \\MCVPRDDB\sapmnt\trans\EPS\in
# EPS ROOT = \\MCVPRDDB\sapmnt\trans\EPS
# DBASID = PRD
# DBAHOST = MCVPRDDB
# DBAPWD = <NOT REPORTED>
# NR R3TRANS = 5
# NR R3LOAD = 1
# IMPORT DESTTIME = 86400
# STARTR3 = "startsap.exe"
# STARTPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STOPR3 = "stopsap.exe"
# STOPPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STARTDB = ""
# STARTPARAMS DB = " "
# STOPDB = ""
# STOPPARAMS DB = " "
# UPGRADE USER = prdadm
# UPGRADE LANGUAGE = E
# SLOGNAME = SLOG700
# ALOGNAME = ALOG700
# SYSNUM = 30
# PROFNAME = C:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS30_MCVPRDDB
# DDIC PWD = <NOT REPORTED>
# GATEWAY HOST = MCVPRDDB
# GATEWAY SERVICE = sapgw30
# MS INTERNAL SERVICE = 3930
# SLOW SHADOW IMPORT = Y
# MAX BUFREFTIME = 120
# BATCH HOST = MCVPRDDB
# NR BTC-PROCS INTERN = 3
# CUSTOMER GENERATION = 0
# SAP START PROFILE = START_DVEBMGS30_MCVPRDDB
# DEFPROFNAME = C:\usr\sap\PRD\SYS\profile\DEFAULT.PFL
# OSTYPE = Windows NT X86_64
# OSVERS = 5.2
# DESTVERS = 700
# COMPDESTVERS = EA-APPL=600,EA-DFPS=600,EA-FINSERV=600,EA-GLTRADE=600,EA-HR=600,EA-IPPE=400,EA-PS=600,EA-RETAIL=600,ECC-DIMP=600,ERECRUIT=600,FI-CA=600,FI-CAX=600,FINBASIS=600,INSURANCE=600,IS-CWM=600,IS-H=600,IS-M=600,IS-OIL=600,IS-PS-CA=600,IS-UT=600,LSOFE=600,PI_BASIS=2005_1_700,SAP_ABA=700,SAP_AP=700,SAP_APPL=600,SAP_BASIS=700,SAP_BW=700,SAP_HR=600,SEM-BW=600,ST-PI=2005_1_700
# SUBSTSTVERS = 700
# COMPSUBSTSTVERS = SAP_BASIS=700,SAP_ABA=700,SAP_APPL=600,SAP_HR=600,SAP_BW=700
# DESTPRODSHORTID = R/3
# DESTPRODSHORTREL = 700
# IMPORT LANGUAGES =
# DB REPSWITCH PAR = NOT_SPECIFIED
# PARALLEL DDLNTABS = 0
# TABLSIZE = 0
# KERNEL BIT SELECTION = 64 bit, no choice
# SHD INSTANCE NUMBER =
# SHD send d talk port = -1
# SHD send d listen port = -1
# SHD collect d listen port = -1
# SHD collect d talk port = -1
# SHD GW SERVICE =
# SHD MS INTERNAL SERVICE =
# SHD HOST =
# SHD GW HOST =
# SHD STARTPATH =
# SHD R3 START PROFILE =
# SHD PROFILE PATH =
# SHD PROFILE NAME =
# SHD startsap =
# SHD stopsap =
# SHD workpath =
# SHD kernpath =
# dba schema = dbo
# dba shd schema = dbo_shd
# connect env string = dbs_mss_schema
# REMOTE UPGRADE DIRECTORY =
# SAP SERVICE ACCOUNT = MCV-EG.COM\SAPServicePRD
# SAP SERVICE ACCOUNT PWD= <NOT REPORTED>
# Original shadow profile =
# NO UNICODE. DB factor is: 1
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
..finished at 20130624120701 with status SUCCEEDED.
UPGRADEPHASE RFCCHK_INI
...started at 20130624120701
# Phase log file: 'RFCCHK_INI.LOG'
..finished at 20130624120702 with status SUCCEEDED.
UPGRADEPHASE VERSCHK_INI
...started at 20130624120702
# Phase list derived in VERSCHK:
# INITCURENV
# DBCHK_INI
# RFCCHK_INI
# VERSCHK_INI
# VALCHK_INI
# EHP_CHK
# TOOLVERSION_INI
# UNICODE_CHK_PRE
# TOOLVERSION_UPG1
# DBCONNCHK_INI
# SETSYNC_INFO_FINISHED
# UCMIG_DECISION
# CLNT_CHK_INI
# PATCH_CHK1
# INTCHK_INI
# ADJ_CNTRANS
# INIT_CNTRANS
# CNTRANS_PRE
# DMPSPC_INI
# JOB_RSDB4090
# CHK_DB6_REG_PRE
# CHK_DB6_PAR_INI
# SPACECHK_INI
# KRNCHK_DEST
# DBPREP_CHK
# EXECCV
# EXECAV
# COMPINFO_INI
# ASU_CHK
# ADDON_CHK
# ADDON_INFO
# ADDON_SPEC1
# ADDON_TREAS
# ADDON_WFM
# ADDON_DMC
# ACE_CHK
# CRM_BILL
# PR_DBPAR
# CHECKGROUP_END1
..finished at 20130624120702 with status SUCCEEDED.
UPGRADEPHASE VALCHK_INI
...started at 20130624120702
# Phase log file: 'VALCHK.LOG'
..finished at 20130624120703 with status SUCCEEDED.
UPGRADEPHASE EHP_CHK
...started at 20130624120703
# Phase log file: 'EHPCHK.LOG'
..finished at 20130624120708 with status SUCCEEDED.
UPGRADEPHASE TOOLVERSION_INI
...started at 20130624120709
# Phase log file: 'TOOLVERS.LOG'
# TOOL-VERSION 'disp+work': SYS_DISPWORK_REL = '640'
# TOOL-VERSION 'disp+work': SYS_DISPWORK_VARIANT = '640_REL'
# TOOL-VERSION 'disp+work': SYS_DISPWORK_64BIT = 'ON'
# TOOL-VERSION 'disp+work': SYS_DISPWORK_DATE = 'Jul 6 2005 21:21:07'
# TOOL-VERSION 'disp+work': SYS_DISPWORK_PATCHNUM = '80'
# TOOL-VERSION 'tp': SYS_TP_VERSION = '340.16.72'
# TOOL-VERSION 'tp': SYS_TP_REL = '640'
# TOOL-VERSION 'tp': SYS_TP_PATCHNUM = '400'
# TOOL-VERSION 'R3trans': SYS_R3TRANS_VERSION = '6.13'
# TOOL-VERSION 'R3trans': SYS_R3TRANS_REL = '640'
# TOOL-VERSION 'R3trans': SYS_R3TRANS_DATE = '17.09.12'
# TOOL-VERSION 'R3trans': SYS_R3TRANS_PATCHNUM = '413'
# TOOL-VERSION 'R3load': SYS_R3LOAD_REL = '6.40'
# TOOL-VERSION 'R3load': SYS_R3LOAD_VERSION = '1.4'
# TOOL-VERSION 'R3load': SYS_R3LOAD_DATE = 'Jul 19 2005 21:35:33'
# TOOL-VERSION 'DBSL': SYS_DBSL_REL = '640'
# TOOL-VERSION 'SAPLICENSE': SYS_SAPLICENSE_REL = '640'
# TOOL-VERSION 'SAPLICENSE': SYS_SAPLICENSE_PATCHNUM = '48'
# Environment for SAPup:
# SAPSID = PRD
# SAPHOST = MCVPRDDB
# STARTPATH = C:\usr\sap\PRD\SYS\exe\run
# KERNPATH = C:\usr\sap\PRD\SYS\exe\run
# PROFPATH = C:\usr\sap\PRD\SYS\profile
# LOCAL SLOG = C:\usr\sap\PRD\DVEBMGS30\log\SLOG30.LOG
# LOCAL SLOG (OLD) = C:\usr\sap\PRD\DVEBMGS30\log\SLOGO30.LOG
# CENTRAL SLOG =
# CENTRAL SLOG (OLD) =
# EPS INBOX = \\MCVPRDDB\sapmnt\trans\EPS\in
# EPS ROOT = \\MCVPRDDB\sapmnt\trans\EPS
# DBASID = PRD
# DBAHOST = MCVPRDDB
# DBAPWD = <NOT REPORTED>
# NR R3TRANS = 5
# NR R3LOAD = 1
# IMPORT DESTTIME = 86400
# STARTR3 = "startsap.exe"
# STARTPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STOPR3 = "stopsap.exe"
# STOPPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STARTDB = ""
# STARTPARAMS DB = " "
# STOPDB = ""
# STOPPARAMS DB = " "
# UPGRADE USER = prdadm
# UPGRADE LANGUAGE = E
# SLOGNAME = SLOG700
# ALOGNAME = ALOG700
# SYSNUM = 30
# PROFNAME = C:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS30_MCVPRDDB
# DDIC PWD = <NOT REPORTED>
# GATEWAY HOST = MCVPRDDB
# GATEWAY SERVICE = sapgw30
# MS INTERNAL SERVICE = 3930
# SLOW SHADOW IMPORT = Y
# MAX BUFREFTIME = 120
# BATCH HOST = MCVPRDDB
# NR BTC-PROCS INTERN = 3
# CUSTOMER GENERATION = 0
# SAP START PROFILE = START_DVEBMGS30_MCVPRDDB
# DEFPROFNAME = C:\usr\sap\PRD\SYS\profile\DEFAULT.PFL
# OSTYPE = Windows NT X86_64
# OSVERS = 5.2
# DESTVERS = 700
# COMPDESTVERS = EA-APPL=600,EA-DFPS=600,EA-FINSERV=600,EA-GLTRADE=600,EA-HR=600,EA-IPPE=400,EA-PS=600,EA-RETAIL=600,ECC-DIMP=600,ERECRUIT=600,FI-CA=600,FI-CAX=600,FINBASIS=600,INSURANCE=600,IS-CWM=600,IS-H=600,IS-M=600,IS-OIL=600,IS-PS-CA=600,IS-UT=600,LSOFE=600,PI_BASIS=2005_1_700,SAP_ABA=700,SAP_AP=700,SAP_APPL=600,SAP_BASIS=700,SAP_BW=700,SAP_HR=600,SEM-BW=600,ST-PI=2005_1_700
# SUBSTSTVERS = 700
# COMPSUBSTSTVERS = SAP_BASIS=700,SAP_ABA=700,SAP_APPL=600,SAP_HR=600,SAP_BW=700
# DESTPRODSHORTID = R/3
# DESTPRODSHORTREL = 700
# IMPORT LANGUAGES =
# DB REPSWITCH PAR = NOT_SPECIFIED
# PARALLEL DDLNTABS = 0
# TABLSIZE = 0
# KERNEL BIT SELECTION = 64 bit, no choice
# SHD INSTANCE NUMBER =
# SHD send d talk port = -1
# SHD send d listen port = -1
# SHD collect d listen port = -1
# SHD collect d talk port = -1
# SHD GW SERVICE =
# SHD MS INTERNAL SERVICE =
# SHD HOST =
# SHD GW HOST =
# SHD STARTPATH =
# SHD R3 START PROFILE =
# SHD PROFILE PATH =
# SHD PROFILE NAME =
# SHD startsap =
# SHD stopsap =
# SHD workpath =
# SHD kernpath =
# dba schema = dbo
# dba shd schema = dbo_shd
# connect env string = dbs_mss_schema
# REMOTE UPGRADE DIRECTORY =
# SAP SERVICE ACCOUNT = MCV-EG.COM\SAPServicePRD
# SAP SERVICE ACCOUNT PWD= <NOT REPORTED>
# Original shadow profile =
# Condition level 1, total => FALSE '#if 1 < 0' => FALSE
# Condition level 1, total => FALSE '#elseif 1 < 0' => FALSE
# Condition level 2, total => FALSE '#if "MSSQL" == "SAPDB"' => FALSE
# Condition level 1, total => FALSE '#elseif 1 < 0' => FALSE
# Condition level 1, total => FALSE '#elseif 1 < 0' => FALSE
# Condition level 1, total => FALSE '#elseif 0 < 0' => FALSE
# Condition level 2, total => FALSE '#if "MSSQL" == "DB2-z/OS"' => FALSE
# Condition level 1, total => TRUE '#elseif -1 < 0' => TRUE
# Condition level 2, total => FALSE '#if "MSSQL" == "DB2-z/OS" && 0 == 0' => FALSE
# Condition level 1, total => FALSE '#if OK == "DATE"' => FALSE
# Condition level 1, total => FALSE '#elseif OK == "VERSION"' => FALSE
# Condition level 1, total => FALSE '#elseif OK == "PATCHNUM"' => FALSE
# Condition level 1, total => FALSE '#elseif OK == "RELEASE"' => FALSE
# Condition level 1, total => TRUE '#elseif OK == "OK"' => TRUE
# Condition level 1, total => FALSE '#if OK == "DATE"' => FALSE
# Condition level 1, total => FALSE '#elseif OK == "VERSION"' => FALSE
# Condition level 1, total => FALSE '#elseif OK == "PATCHNUM"' => FALSE
# Condition level 1, total => FALSE '#elseif OK == "RELEASE"' => FALSE
# Condition level 1, total => TRUE '#elseif OK == "OK"' => TRUE
# Condition level 1, total => FALSE '#if OK == "DATE"' => FALSE
# Condition level 1, total => FALSE '#elseif OK == "VERSION"' => FALSE
# Condition level 1, total => FALSE '#elseif OK == "PATCHNUM"' => FALSE
# Condition level 1, total => FALSE '#elseif OK == "RELEASE"' => FALSE
# Condition level 1, total => TRUE '#elseif OK == "OK"' => TRUE
..finished at 20130624120711 with status SUCCEEDED.
UPGRADEPHASE UNICODE_CHK_PRE
...started at 20130624120711
# Phase log file: 'UNICHK.LOG'
..finished at 20130624120711 with status SUCCEEDED.
UPGRADEPHASE TOOLVERSION_UPG1
...started at 20130624120711
# Phase log file: 'TOOLVRSUPG.LOG'
# TOOL-VERSION 'disp+work': EXE_DISPWORK_REL = '720'
# TOOL-VERSION 'disp+work': EXE_DISPWORK_VARIANT = '720_REL'
# TOOL-VERSION 'disp+work': EXE_DISPWORK_64BIT = 'ON'
# TOOL-VERSION 'disp+work': EXE_DISPWORK_DATE = 'Jan 16 2013 17:18:12'
# TOOL-VERSION 'disp+work': EXE_DISPWORK_PATCHNUM = '401'
# TOOL-VERSION 'tp': EXE_TP_VERSION = '380.04.07'
# TOOL-VERSION 'tp': EXE_TP_REL = '720'
# TOOL-VERSION 'tp': EXE_TP_PATCHNUM = '324'
# TOOL-VERSION 'R3trans': EXE_R3TRANS_VERSION = '6.23'
# TOOL-VERSION 'R3trans': EXE_R3TRANS_REL = '720'
# TOOL-VERSION 'R3trans': EXE_R3TRANS_DATE = '31.10.12'
# TOOL-VERSION 'R3trans': EXE_R3TRANS_PATCHNUM = '324'
# TOOL-VERSION 'DBSL': EXE_DBSL_REL = '720'
# TOOL-VERSION 'SAPLICENSE': EXE_SAPLICENSE_REL = '720'
# TOOL-VERSION 'SAPLICENSE': EXE_SAPLICENSE_PATCHNUM = '312'
# Environment for SAPup:
# SAPSID = PRD
# SAPHOST = MCVPRDDB
# STARTPATH = C:\usr\sap\PRD\SYS\exe\run
# KERNPATH = C:\usr\sap\PRD\SYS\exe\run
# PROFPATH = C:\usr\sap\PRD\SYS\profile
# LOCAL SLOG = C:\usr\sap\PRD\DVEBMGS30\log\SLOG30.LOG
# LOCAL SLOG (OLD) = C:\usr\sap\PRD\DVEBMGS30\log\SLOGO30.LOG
# CENTRAL SLOG =
# CENTRAL SLOG (OLD) =
# EPS INBOX = \\MCVPRDDB\sapmnt\trans\EPS\in
# EPS ROOT = \\MCVPRDDB\sapmnt\trans\EPS
# DBASID = PRD
# DBAHOST = MCVPRDDB
# DBAPWD = <NOT REPORTED>
# NR R3TRANS = 5
# NR R3LOAD = 1
# IMPORT DESTTIME = 86400
# STARTR3 = "startsap.exe"
# STARTPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STOPR3 = "stopsap.exe"
# STOPPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STARTDB = ""
# STARTPARAMS DB = " "
# STOPDB = ""
# STOPPARAMS DB = " "
# UPGRADE USER = prdadm
# UPGRADE LANGUAGE = E
# SLOGNAME = SLOG700
# ALOGNAME = ALOG700
# SYSNUM = 30
# PROFNAME = C:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS30_MCVPRDDB
# DDIC PWD = <NOT REPORTED>
# GATEWAY HOST = MCVPRDDB
# GATEWAY SERVICE = sapgw30
# MS INTERNAL SERVICE = 3930
# SLOW SHADOW IMPORT = Y
# MAX BUFREFTIME = 120
# BATCH HOST = MCVPRDDB
# NR BTC-PROCS INTERN = 3
# CUSTOMER GENERATION = 0
# SAP START PROFILE = START_DVEBMGS30_MCVPRDDB
# DEFPROFNAME = C:\usr\sap\PRD\SYS\profile\DEFAULT.PFL
# OSTYPE = Windows NT X86_64
# OSVERS = 5.2
# DESTVERS = 700
# COMPDESTVERS = EA-APPL=600,EA-DFPS=600,EA-FINSERV=600,EA-GLTRADE=600,EA-HR=600,EA-IPPE=400,EA-PS=600,EA-RETAIL=600,ECC-DIMP=600,ERECRUIT=600,FI-CA=600,FI-CAX=600,FINBASIS=600,INSURANCE=600,IS-CWM=600,IS-H=600,IS-M=600,IS-OIL=600,IS-PS-CA=600,IS-UT=600,LSOFE=600,PI_BASIS=2005_1_700,SAP_ABA=700,SAP_AP=700,SAP_APPL=600,SAP_BASIS=700,SAP_BW=700,SAP_HR=600,SEM-BW=600,ST-PI=2005_1_700
# SUBSTSTVERS = 700
# COMPSUBSTSTVERS = SAP_BASIS=700,SAP_ABA=700,SAP_APPL=600,SAP_HR=600,SAP_BW=700
# DESTPRODSHORTID = R/3
# DESTPRODSHORTREL = 700
# IMPORT LANGUAGES =
# DB REPSWITCH PAR = NOT_SPECIFIED
# PARALLEL DDLNTABS = 0
# TABLSIZE = 0
# KERNEL BIT SELECTION = 64 bit, no choice
# SHD INSTANCE NUMBER =
# SHD send d talk port = -1
# SHD send d listen port = -1
# SHD collect d listen port = -1
# SHD collect d talk port = -1
# SHD GW SERVICE =
# SHD MS INTERNAL SERVICE =
# SHD HOST =
# SHD GW HOST =
# SHD STARTPATH =
# SHD R3 START PROFILE =
# SHD PROFILE PATH =
# SHD PROFILE NAME =
# SHD startsap =
# SHD stopsap =
# SHD workpath =
# SHD kernpath =
# dba schema = dbo
# dba shd schema = dbo_shd
# connect env string = dbs_mss_schema
# REMOTE UPGRADE DIRECTORY =
# SAP SERVICE ACCOUNT = MCV-EG.COM\SAPServicePRD
# SAP SERVICE ACCOUNT PWD= <NOT REPORTED>
# Original shadow profile =
# Condition level 1, total => FALSE '#if "MSSQL" == "DB2-z/OS"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB2/400"' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) && ( -1 >= 0 )' => FALSE
# Condition level 1, total => FALSE '#if ("Windows NT X86_64" ~= "Windows") && ("5.2" ~= "6.1")' => FALSE
..finished at 20130624120717 with status SUCCEEDED.
UPGRADEPHASE DBCONNCHK_INI
...started at 20130624120717
..finished at 20130624120719 with status SUCCEEDED.
UPGRADEPHASE SETSYNC_INFO_FINISHED
...started at 20130624120719
# Phase skipped due to condition 'J2EE_ONLY'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130624120719 with status SUCCEEDED.
UPGRADEPHASE UCMIG_DECISION
...started at 20130624120719
# Phase log file: 'UCMIGDEC.LOG'
# Condition level 1, total => FALSE '#if "MSSQL" == "DB2-z/OS"' => FALSE
...begin dialogue at 20130624120725
...end dialogue at 20130624120730
..finished at 20130624120730 with status SUCCEEDED.
UPGRADEPHASE CLNT_CHK_INI
...started at 20130624120730
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
..finished at 20130624120736 with status SUCCEEDED.
UPGRADEPHASE PATCH_CHK1
...started at 20130624120736
# PATCHLEVEL OF "ABA_PLUS" = 15
# PATCHLEVEL OF "EA-APPL" = 9
# PATCHLEVEL OF "EA-DFPS" = 9
# PATCHLEVEL OF "EA-FINSERV" = 9
# PATCHLEVEL OF "EA-GLTRADE" = 9
# PATCHLEVEL OF "EA-HR" = 30
# PATCHLEVEL OF "EA-IPPE" = 17
# PATCHLEVEL OF "EA-PS" = 9
# PATCHLEVEL OF "EA-RETAIL" = 0
# PATCHLEVEL OF "PI" = 9
# PATCHLEVEL OF "PI_BASIS" = 7
# PATCHLEVEL OF "ST-A/PI" = 0
# PATCHLEVEL OF "ST-PI" = 7
# PATCHLEVEL OF "SAP_APPL" = 33
# PATCHLEVEL OF "SAP_HR" = 49
# PATCHLEVEL OF "SAP_BW" = 0
# PATCHLEVEL OF "SAP_APO" = 0
# PATCHLEVEL OF "SAP_BASIS" = 67
# PATCHLEVEL OF "SAP_ABA" = 67
# PATCHLEVEL OF "BBPCRM" = 0
# PATCHLEVEL OF "SCR" = 0
..finished at 20130624120741 with status SUCCEEDED.
UPGRADEPHASE INTCHK_INI
...started at 20130624120741
..finished at 20130624120743 with status SUCCEEDED.
UPGRADEPHASE ADJ_CNTRANS
...started at 20130624120743
# Phase log file: 'ADJCNTRANS.LOG'
..finished at 20130624121004 with status SUCCEEDED.
UPGRADEPHASE INIT_CNTRANS
...started at 20130624121004
# Phase log file: 'INICNT.LOG'
..finished at 20130624121004 with status SUCCEEDED.
UPGRADEPHASE CNTRANS_PRE
...started at 20130624121004
# Phase log file: 'CNTPRE.LOG'
# Condition level 1, total => FALSE '#if ("MSS" == "ORA" ) || ( "MSS" == "ADA" )' => FALSE
# Condition level 1, total => FALSE '#if ("MSSQL" == "DB2-z/OS") ' => FALSE
# Condition level 2, total => FALSE '#if (-1 >= 0) && (-1 >= 0)' => FALSE
# Condition level 2, total => FALSE '#if (-1 >= 0)' => FALSE
..finished at 20130624121004 with status SUCCEEDED.
UPGRADEPHASE DMPSPC_INI
...started at 20130624121004
# Phase log file: 'DMPSPC_INI.LOG'
..finished at 20130624121004 with status SUCCEEDED.
UPGRADEPHASE JOB_RSDB4090
...started at 20130624121004
# Phase skipped due to condition 'DBTYPE=DB2/400'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130624121005 with status SUCCEEDED.
UPGRADEPHASE CHK_DB6_REG_PRE
...started at 20130624121005
# Phase skipped due to condition 'DBTYPE=DB6'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130624121005 with status SUCCEEDED.
UPGRADEPHASE CHK_DB6_PAR_INI
...started at 20130624121005
# Phase skipped due to condition 'DBTYPE=DB6'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130624121005 with status SUCCEEDED.
UPGRADEPHASE SPACECHK_INI
...started at 20130624121005
# Phase log file: 'DBFPREP.LOG'
# Condition level 1, total => TRUE '#if 0 < 2' => TRUE
..finished at 20130624121005 with status SUCCEEDED.
UPGRADEPHASE KRNCHK_DEST
...started at 20130624121005
# Phase skipped due to condition ST_range '30D-31Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130624121006 with status SUCCEEDED.
UPGRADEPHASE DBPREP_CHK
...started at 20130624121006
..finished at 20130624121006 with status SUCCEEDED.
UPGRADEPHASE EXECCV
...started at 20130624121006
..finished at 20130624121011 with status SUCCEEDED.
UPGRADEPHASE EXECAV
...started at 20130624121011
# Condition level 1, total => FALSE '#if 1 < 0 ' => FALSE
..finished at 20130624121017 with status SUCCEEDED.
UPGRADEPHASE COMPINFO_INI
...started at 20130624121017
# Phase log file: 'COMPINFOINI.LOG'
..finished at 20130624121017 with status SUCCEEDED.
UPGRADEPHASE ASU_CHK
...started at 20130624121017
# Phase log file: 'ASUCHK.LOG'
..finished at 20130624121017 with status SUCCEEDED.
UPGRADEPHASE ADDON_CHK
...started at 20130624121017
# Phase log file: 'ADDONCHK.LOG'
...begin dialogue at 20130624121017
...end dialogue at 20130624121022
..finished at 20130624121022 with status SUCCEEDED.
UPGRADEPHASE ADDON_INFO
...started at 20130624121022
# Phase log file: 'ADDONINFO.LOG'
..finished at 20130624121022 with status SUCCEEDED.
UPGRADEPHASE ADDON_SPEC1
...started at 20130624121022
# Phase log file: 'ADDONSPEC1.LOG'
# Condition level 1, total => FALSE '#if "MSSQL" == "DB2-z/OS"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB2/400"' => FALSE
..finished at 20130624121028 with status SUCCEEDED.
UPGRADEPHASE ADDON_TREAS
...started at 20130624121028
..finished at 20130624121028 with status SUCCEEDED.
UPGRADEPHASE ADDON_WFM
...started at 20130624121028
# Phase skipped due to condition 'startcomponent=BBPCRM'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130624121028 with status SUCCEEDED.
UPGRADEPHASE ADDON_DMC
...started at 20130624121028
# Phase log file: 'ADDONDMC.LOG'
# Condition level 1, total => FALSE '#if "MSSQL" == "DB2-z/OS"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB2/400"' => FALSE
..finished at 20130624121034 with status SUCCEEDED.
UPGRADEPHASE ACE_CHK
...started at 20130624121034
# Phase skipped due to condition 'startcomponent=BBPCRM'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130624121034 with status SUCCEEDED.
UPGRADEPHASE CRM_BILL
...started at 20130624121034
# Phase skipped due to condition 'startcomponent=BBPCRM:300,310'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130624121034 with status SUCCEEDED.
UPGRADEPHASE PR_DBPAR
...started at 20130624121034
# Phase skipped due to condition 'DBTYPE=ORACLE'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130624121034 with status SUCCEEDED.
UPGRADEPHASE CHECKGROUP_END1
...started at 20130624121034
Execution of PREPARE module Initialization ends at 20130624121034
Execution of PREPARE module Import begins at 20130624121034
UPGRADEPHASE
UPGRADEPHASE REQIMPORT
...started at 20130624121034
...begin dialogue at 20130624121034
...end dialogue at 20130624121043
..finished at 20130624121043 with status SUCCEEDED.
UPGRADEPHASE READDATA
...started at 20130624121043
# Condition level 1, total => FALSE '#if 0' => FALSE
# Condition level 1, total => FALSE '#if ( 1 >= 0 ) && ( 1 <= 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( 1 >= 0 ) && ( 1 <= 0 )' => FALSE
# Condition level 1, total => TRUE '#if ( 0 == 0 ) && ("200" == "200")' => TRUE
# Condition level 1, total => FALSE '#if ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#elseif ( -1 >= 0 ) && ( -1 <= 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( 0 == 0 ) && ("200" == "110")' => FALSE
# Condition level 1, total => FALSE '#if ( 1 >= 0 ) && ( 1 <= 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( 1 >= 0 ) && ( 1 <= 0 )' => FALSE
# Info: reading data from CD "UPGRADE(1/16)"
...begin dialogue at 20130624121044
...end dialogue at 20130624121133
...begin dialogue at 20130624121133
...end dialogue at 20130624121137
...begin dialogue at 20130624121137
...end dialogue at 20130624121155
# Info: reading data from CD "UPGRADE(4/16)"
# Condition level 1, total => TRUE '#if ( 0 == 0 ) && ("200" == "200")' => TRUE
..finished at 20130624121653 with status SUCCEEDED.
UPGRADEPHASE READDATA_EXT
...started at 20130624121654
# Info: reading data from CD "UPGRADE(7/16)"
..finished at 20130624121654 with status SUCCEEDED.
UPGRADEPHASE TOOLFIX_CHK
...started at 20130624121654
# Phase log file: 'TOOLFIXCHK.LOG'
Correction package found
Correction package extracted
# TOOLFIX VERSION: 58
# TOOLFIX NAME: FIX_ERP2005SR3
# TOOLFIX DATE: 2013-4-16
..finished at 20130624121657 with status SUCCEEDED.
UPGRADEPHASE CPYFIL0_CBU
...started at 20130624121657
# Phase skipped due to condition 'CBU_only'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130624121657 with status SUCCEEDED.
UPGRADEPHASE EXEC_CPYFIL1_CBU
...started at 20130624121657
# Phase skipped due to condition 'CBU_only'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130624121657 with status SUCCEEDED.
UPGRADEPHASE FRP_CHK
...started at 20130624121657
# Phase skipped due to condition 'destcomponent=SCM'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130624121657 with status SUCCEEDED.
UPGRADEPHASE UNICODELIB_CHK1
...started at 20130624121657
# Phase skipped due to condition 'UNICODE_only'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130624121657 with status SUCCEEDED.
UPGRADEPHASE CNV_CHK_IMP
...started at 20130624121657
..finished at 20130624121658 with status 1 CONVERTER ENTRIES FOUND.
...begin dialogue at 20130624121658
...end dialogue at 20130624121748
...begin dialogue at 20130624121748
...end dialogue at 20130624121751
..answered at 20130624121751.
-> decided to try again.
UPGRADEPHASE CNV_CHK_IMP
...started at 20130624121751
..finished at 20130624121752 with status 1 CONVERTER ENTRIES FOUND.
...begin dialogue at 20130624121752
...end dialogue at 20130624122820
...begin dialogue at 20130624122820
...end dialogue at 20130624122821
..answered at 20130624122821.
-> decided to try again.
UPGRADEPHASE CNV_CHK_IMP
...started at 20130624122821
..finished at 20130624122822 with status 1 CONVERTER ENTRIES FOUND.
...begin dialogue at 20130624122822
...end dialogue at 20130624123951
...begin dialogue at 20130624123951
...end dialogue at 20130624123953
..answered at 20130624123953.
-> decided to try again.
UPGRADEPHASE CNV_CHK_IMP
...started at 20130624123953
..finished at 20130624123954 with status SUCCEEDED.
UPGRADEPHASE ICNVCHK_IMP
...started at 20130624123954
# Phase log file: 'ICNVCHK.LOG'
..finished at 20130624123955 with status SUCCEEDED.
UPGRADEPHASE SCRIPT_CHK_TOOL3
...started at 20130624123955
# Phase skipped due to condition ST_range '*-31Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130624123955 with status SUCCEEDED.
UPGRADEPHASE SCRIPT_CHK_TOOL4
...started at 20130624123955
# Phase log file: 'SCRIPTCHK.LOG'
..finished at 20130624123956 with status SUCCEEDED.
UPGRADEPHASE SCRIPT2_TST_RESTART
...started at 20130624123956
# Phase log file: 'SCRTREST.LOG'
..finished at 20130624123957 with status SUCCEEDED.
UPGRADEPHASE TRBATCHK_IMP
...started at 20130624123958
..finished at 20130624123958 with status SUCCEEDED.
UPGRADEPHASE CLNT_CHK_IMP
...started at 20130624123958
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
..finished at 20130624124004 with status SUCCEEDED.
UPGRADEPHASE INTCHK_IMP
...started at 20130624124004
..finished at 20130624124005 with status 19 DDXTT ENTRIES, 93 DDXTF ENTRIES.
...begin dialogue at 20130624124005
...end dialogue at 20130624124129
...begin dialogue at 20130624124129
...end dialogue at 20130624124133
..answered at 20130624124133.
-> decided to try again.
UPGRADEPHASE INTCHK_IMP
...started at 20130624124133
..finished at 20130624124134 with status 19 DDXTT ENTRIES, 93 DDXTF ENTRIES.
...begin dialogue at 20130624124134
...end dialogue at 20130624125215
...begin dialogue at 20130624125215
...end dialogue at 20130624125216
..answered at 20130624125216.
-> decided to try again.
UPGRADEPHASE INTCHK_IMP
...started at 20130624125216
..finished at 20130624125217 with status SUCCEEDED.
UPGRADEPHASE SPACECHK_IMP
...started at 20130624125218
# Phase log file: 'DBFPREP.LOG'
# Condition level 1, total => TRUE '#if 0 < 2' => TRUE
..finished at 20130624125218 with status SUCCEEDED.
UPGRADEPHASE PATCH_CHK2
...started at 20130624125218
# PATCHLEVEL OF "ABA_PLUS" = 15
# PATCHLEVEL OF "EA-APPL" = 9
# PATCHLEVEL OF "EA-DFPS" = 9
# PATCHLEVEL OF "EA-FINSERV" = 9
# PATCHLEVEL OF "EA-GLTRADE" = 9
# PATCHLEVEL OF "EA-HR" = 30
# PATCHLEVEL OF "EA-IPPE" = 17
# PATCHLEVEL OF "EA-PS" = 9
# PATCHLEVEL OF "EA-RETAIL" = 0
# PATCHLEVEL OF "PI" = 9
# PATCHLEVEL OF "PI_BASIS" = 7
# PATCHLEVEL OF "ST-A/PI" = 0
# PATCHLEVEL OF "ST-PI" = 7
# PATCHLEVEL OF "SAP_APO" = 0
# PATCHLEVEL OF "BBPCRM" = 0
# PATCHLEVEL OF "SAP_APPL" = 33
# PATCHLEVEL OF "SAP_HR" = 49
# PATCHLEVEL OF "SAP_BW" = 0
# PATCHLEVEL OF "SAP_BASIS" = 67
# PATCHLEVEL OF "SAP_ABA" = 67
# PATCHLEVEL OF "SCR" = 0
..finished at 20130624125224 with status SUCCEEDED.
UPGRADEPHASE NTHISTCRE
...started at 20130624125224
# Phase skipped due to condition ST_range '*-40B'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130624125224 with status SUCCEEDED.
UPGRADEPHASE ALTER_TO
...started at 20130624125224
..finished at 20130624125231 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPD1
...started at 20130624125231
# Phase skipped due to condition ST_range '30D-31Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130624125231 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPD2
...started at 20130624125231
# Phase skipped due to condition ST_range '40A-40Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130624125231 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPD3
...started at 20130624125231
# Phase skipped due to condition ST_range '45A-46Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130624125231 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPD4
...started at 20130624125232
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB6" ) && ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) ' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
...begin processing at 20130624125232
...tp-pid 3996
..finished at 20130624125602 with status SUCCEEDED.
UPGRADEPHASE MVNTAB_TOOL
...started at 20130624125602
# Phase log file: 'MVNTTOOL.LOG'
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
..finished at 20130624130235 with status MVNTABS FAILED.
...begin dialogue at 20130624130235
...end dialogue at 20130624142339
...begin dialogue at 20130624142339
...end dialogue at 20130624142341
..answered at 20130624142341.
...begin dialogue at 20130624142341
...end dialogue at 20130624142343
...begin dialogue at 20130624142343
...end dialogue at 20130624142344
...begin dialogue at 20130624142344
...end dialogue at 20130624142346
...begin dialogue at 20130624142346
...end dialogue at 20130624142352
...begin dialogue at 20130624142352
...end dialogue at 20130624142353
...begin dialogue at 20130624142353
...end dialogue at 20130624142354
...begin dialogue at 20130624142354
...end dialogue at 20130624142356
-> unknown password.
..finished at 20130624142356 with SEVERE ERROR(S).
...begin dialogue at 20130624142356
...end dialogue at 20130624142400
..answered at 20130624142400.
-> decided to retry.
UPGRADEPHASE MVNTAB_TOOL
...started at 20130624142400
# Phase log file: 'MVNTTOOL.LOG'
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
..finished at 20130624142603 with status MVNTABS FAILED.
...begin dialogue at 20130624142603
...end dialogue at 20130624150842
...begin dialogue at 20130624150842
...end dialogue at 20130624150843
..answered at 20130624150843.
-> decided to try again.
UPGRADEPHASE MVNTAB_TOOL
...started at 20130624150843
# Phase log file: 'MVNTTOOL.LOG'
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
..finished at 20130624151045 with status MVNTABS FAILED.
...begin dialogue at 20130624151045
...end dialogue at 20130624151352
...begin dialogue at 20130624151352
...end dialogue at 20130624151411
..answered at 20130624151411.
...begin dialogue at 20130624151411
...end dialogue at 20130624151412
...begin dialogue at 20130624151413
...end dialogue at 20130624151413
...begin dialogue at 20130624151413
...end dialogue at 20130624151417
-> unknown password.
..finished at 20130624151417 with SEVERE ERROR(S).
...begin dialogue at 20130624151417
...end dialogue at 20130624151452
..answered at 20130624151452.
-> decided to retry.
UPGRADEPHASE MVNTAB_TOOL
...started at 20130624151452
# Phase log file: 'MVNTTOOL.LOG'
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
..finished at 20130624151655 with status MVNTABS FAILED.
...begin dialogue at 20130624151655
...end dialogue at 20130624155922
...begin dialogue at 20130624155922
...end dialogue at 20130624155923
..answered at 20130624155923.
-> decided to try again.
UPGRADEPHASE MVNTAB_TOOL
...started at 20130624155923
# Phase log file: 'MVNTTOOL.LOG'
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
..finished at 20130624160126 with status MVNTABS FAILED.
...begin dialogue at 20130624160126
...end dialogue at 20130624160353
...begin dialogue at 20130624160353
...end dialogue at 20130624160355
..answered at 20130624160355.
-> decided to try again.
UPGRADEPHASE MVNTAB_TOOL
...started at 20130624160355
# Phase log file: 'MVNTTOOL.LOG'
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
..finished at 20130624160457 with status MVNTABS FAILED.
...begin dialogue at 20130624160457
...end dialogue at 20130624160714
...begin dialogue at 20130624160714
...end dialogue at 20130624160715
..answered at 20130624160715.
-> decided to try again.
UPGRADEPHASE MVNTAB_TOOL
...started at 20130624160715
# Phase log file: 'MVNTTOOL.LOG'
..finished at 20130624160716 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPI
...started at 20130624160717
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB6" ) && ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) ' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
...begin processing at 20130624160717
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup version 7.00/3 patch level 25.026.
# Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
# Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20130624162245
...end dialogue at 20130624162247
...STARTED at 20130624162247.
# Environment for SAPup:
# SAPSID = PRD
# SAPHOST = MCVPRDDB
# STARTPATH = C:\usr\sap\PRD\SYS\exe\run
# KERNPATH = C:\usr\sap\PRD\SYS\exe\run
# PROFPATH = C:\usr\sap\PRD\SYS\profile
# LOCAL SLOG = C:\usr\sap\PRD\DVEBMGS30\log\SLOG30.LOG
# LOCAL SLOG (OLD) = C:\usr\sap\PRD\DVEBMGS30\log\SLOGO30.LOG
# CENTRAL SLOG =
# CENTRAL SLOG (OLD) =
# EPS INBOX = \\MCVPRDDB\sapmnt\trans\EPS\in
# EPS ROOT = \\MCVPRDDB\sapmnt\trans\EPS
# DBASID = PRD
# DBAHOST = MCVPRDDB
# DBAPWD = <NOT REPORTED>
# NR R3TRANS = 5
# NR R3LOAD = 1
# IMPORT DESTTIME = 86400
# STARTR3 = "startsap.exe"
# STARTPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STOPR3 = "stopsap.exe"
# STOPPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STARTDB = ""
# STARTPARAMS DB = " "
# STOPDB = ""
# STOPPARAMS DB = " "
# UPGRADE USER = prdadm
# UPGRADE LANGUAGE = E
# SLOGNAME = SLOG700
# ALOGNAME = ALOG700
# SYSNUM = 30
# PROFNAME = C:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS30_MCVPRDDB
# DDIC PWD = <NOT REPORTED>
# GATEWAY HOST = MCVPRDDB
# GATEWAY SERVICE = sapgw30
# MS INTERNAL SERVICE = 3930
# SLOW SHADOW IMPORT = Y
# MAX BUFREFTIME = 120
# BATCH HOST = MCVPRDDB
# NR BTC-PROCS INTERN = 3
# CUSTOMER GENERATION = 0
# SAP START PROFILE = START_DVEBMGS30_MCVPRDDB
# DEFPROFNAME = C:\usr\sap\PRD\SYS\profile\DEFAULT.PFL
# OSTYPE = Windows NT X86_64
# OSVERS = 5.2
# DESTVERS = 700
# COMPDESTVERS = EA-APPL=600,EA-DFPS=600,EA-FINSERV=600,EA-GLTRADE=600,EA-HR=600,EA-IPPE=400,EA-PS=600,EA-RETAIL=600,ECC-DIMP=600,ERECRUIT=600,FI-CA=600,FI-CAX=600,FINBASIS=600,INSURANCE=600,IS-CWM=600,IS-H=600,IS-M=600,IS-OIL=600,IS-PS-CA=600,IS-UT=600,LSOFE=600,PI_BASIS=2005_1_700,SAP_ABA=700,SAP_AP=700,SAP_APPL=600,SAP_BASIS=700,SAP_BW=700,SAP_HR=600,SEM-BW=600,ST-PI=2005_1_700
# SUBSTSTVERS = 700
# COMPSUBSTSTVERS = SAP_BASIS=700,SAP_ABA=700,SAP_APPL=600,SAP_HR=600,SAP_BW=700
# DESTPRODSHORTID = R/3
# DESTPRODSHORTREL = 700
# IMPORT LANGUAGES =
# DB REPSWITCH PAR = NOT_SPECIFIED
# PARALLEL DDLNTABS = 0
# TABLSIZE = 0
# KERNEL BIT SELECTION = 64 bit, no choice
# SHD INSTANCE NUMBER =
# SHD send d talk port = -1
# SHD send d listen port = -1
# SHD collect d listen port = -1
# SHD collect d talk port = -1
# SHD GW SERVICE =
# SHD MS INTERNAL SERVICE =
# SHD HOST =
# SHD GW HOST =
# SHD STARTPATH =
# SHD R3 START PROFILE =
# SHD PROFILE PATH =
# SHD PROFILE NAME =
# SHD startsap =
# SHD stopsap =
# SHD workpath =
# SHD kernpath =
# dba schema = dbo
# dba shd schema = dbo_shd
# connect env string = dbs_mss_schema
# REMOTE UPGRADE DIRECTORY =
# SAP SERVICE ACCOUNT = MCV-EG.COM\SAPServicePRD
# SAP SERVICE ACCOUNT PWD= <NOT REPORTED>
# Original shadow profile =
...begin dialogue at 20130624162250
...end dialogue at 20130624162451
...begin dialogue at 20130624162537
...end dialogue at 20130624162548
UPGRADEPHASE TOOLIMPI
...started at 20130624162548
# Condition level 1, total => FALSE '#if "MSSQL" == "SAPDB"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB2-z/OS"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB2/400"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB6"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "INFORMIX"' => FALSE
# Condition level 1, total => TRUE '#elseif "MSSQL" == "MSSQL"' => TRUE
# Condition level 1, total => FALSE '#if "Windows NT X86_64" ~= "Linux"' => FALSE
# Condition level 1, total => FALSE '#elseif "Windows NT X86_64" ~= "Windows NT INTEL"' => FALSE
# Condition level 1, total => FALSE '#elseif "Windows NT X86_64" ~= "Windows NT IA64"' => FALSE
# Condition level 1, total => TRUE '#elseif "Windows NT X86_64" ~= "Windows NT X86_64"' => TRUE
...begin processing at 20130624162548
...tp-pid 3432
..finished at 20130624172527 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPM
...started at 20130624172737
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB6" ) && ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) ' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
...begin processing at 20130624172738
...tp-pid 180
..finished at 20130624172811 with status SUCCEEDED.
UPGRADEPHASE TOOLIMP4_UCMIG
...started at 20130624172811
# Phase skipped due to condition ST_range '46C-46Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130624172811 with status SUCCEEDED.
UPGRADEPHASE TOOLIMP4_FIX
...started at 20130624172811
# Phase skipped due to condition ST_range '*-46Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130624172812 with status SUCCEEDED.
UPGRADEPHASE TOOLIMP6_FIX
...started at 20130624172812
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB6" ) && ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) ' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
...begin processing at 20130624172812
...tp-pid 5264
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
..finished at 20130624172855 with status 152 ERRORS DETECTED.
...begin dialogue at 20130624172855
...end dialogue at 20130625082636
...begin dialogue at 20130625082636
...end dialogue at 20130625082641
..answered at 20130625082641.
-> decided to try again.
UPGRADEPHASE TOOLIMP6_FIX
...started at 20130625082641
...begin processing at 20130625082641
...tp-pid 4024
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
..finished at 20130625082700 with status 152 ERRORS DETECTED.
...begin dialogue at 20130625082700
...end dialogue at 20130625085208
...begin dialogue at 20130625085208
...end dialogue at 20130625085210
..answered at 20130625085210.
-> decided to try again.
UPGRADEPHASE TOOLIMP6_FIX
...started at 20130625085210
...begin processing at 20130625085210
...tp-pid 1896
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
..finished at 20130625085227 with status 152 ERRORS DETECTED.
...begin dialogue at 20130625085227
...end dialogue at 20130625091712
...begin dialogue at 20130625091712
...end dialogue at 20130625091714
..answered at 20130625091714.
-> decided to try again.
UPGRADEPHASE TOOLIMP6_FIX
...started at 20130625091714
...begin processing at 20130625091714
...tp-pid 4696
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
..finished at 20130625091733 with status 152 ERRORS DETECTED.
...begin dialogue at 20130625091733
...end dialogue at 20130625092435
...begin dialogue at 20130625092435
...end dialogue at 20130625092436
..answered at 20130625092436.
-> decided to try again.
UPGRADEPHASE TOOLIMP6_FIX
...started at 20130625092436
...begin processing at 20130625092436
...tp-pid 852
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
..finished at 20130625092454 with status 152 ERRORS DETECTED.
...begin dialogue at 20130625092454
...end dialogue at 20130625094216
...begin dialogue at 20130625094216
...end dialogue at 20130625100002
..answered at 20130625100002.
-> decided to try again.
UPGRADEPHASE TOOLIMP6_FIX
...started at 20130625100002
...begin processing at 20130625100002
...tp-pid 5004
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
..finished at 20130625100020 with status 152 ERRORS DETECTED.
...begin dialogue at 20130625100020
...end dialogue at 20130625101259
...begin dialogue at 20130625101259
...end dialogue at 20130625101302
..answered at 20130625101302.
-> decided to try again.
UPGRADEPHASE TOOLIMP6_FIX
...started at 20130625101302
...begin processing at 20130625101302
...tp-pid 1932
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
..finished at 20130625101320 with status 152 ERRORS DETECTED.
...begin dialogue at 20130625101320
...end dialogue at 20130625101441
...begin dialogue at 20130625101442
...end dialogue at 20130625101443
..answered at 20130625101443.
-> decided to try again.
UPGRADEPHASE TOOLIMP6_FIX
...started at 20130625101443
...begin processing at 20130625101443
...tp-pid 2000
..finished at 20130625101445 with status TP ERROR STATUS -1.
...begin dialogue at 20130625101446
...end dialogue at 20130625101500
...begin dialogue at 20130625101500
...end dialogue at 20130625101503
..answered at 20130625101503.
-> decided to try again.
UPGRADEPHASE TOOLIMP6_FIX
...started at 20130625101503
...begin processing at 20130625101503
...tp-pid 424
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
..finished at 20130625101521 with status 152 ERRORS DETECTED.
...begin dialogue at 20130625101521
...end dialogue at 20130625101533
...begin dialogue at 20130625101533
...end dialogue at 20130625101535
..answered at 20130625101535.
-> decided to try again.
UPGRADEPHASE TOOLIMP6_FIX
...started at 20130625101535
...begin processing at 20130625101535
...tp-pid 2240
..finished at 20130625101538 with status SUCCEEDED.
UPGRADEPHASE NPREPCRE0
...started at 20130625101538
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB6" ) && ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) ' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
...begin processing at 20130625101538
...tp-pid 5092
..finished at 20130625102615 with status SUCCEEDED.
UPGRADEPHASE JOB_RSUVSAVE
...started at 20130625102615
# Phase log file: 'PSUVSAVE.LOG'
..finished at 20130625102622 with status SUCCEEDED.
UPGRADEPHASE UVERS_PREIMP
...started at 20130625102622
..finished at 20130625102622 with status SUCCEEDED.
UPGRADEPHASE UVERS_INIT
...started at 20130625102622
..finished at 20130625102625 with status SUCCEEDED.
UPGRADEPHASE SQLDB_UVERS_INIT
...started at 20130625102625
# Phase skipped due to condition ST_range '*-46A'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625102625 with status SUCCEEDED.
UPGRADEPHASE UVERS_CHK_IMP
...started at 20130625102625
# Phase log file: 'UVERSCHK_IMP.LOG'
..finished at 20130625102625 with status SUCCEEDED.
UPGRADEPHASE BATCHCHK_IMP
...started at 20130625102625
# Phase log file: 'BATCHCHK_IMP.LOG'
..finished at 20130625102631 with status SUCCEEDED.
UPGRADEPHASE SQLDB_UCMIG
...started at 20130625102631
# Phase skipped due to condition 'UCMIG_INTEGRATED'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625102631 with status SUCCEEDED.
UPGRADEPHASE UCMIG_STATUS_SET0
...started at 20130625102631
# Phase skipped due to condition 'UCMIG_INTEGRATED'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625102631 with status SUCCEEDED.
UPGRADEPHASE JOB_RSCVINIT
...started at 20130625102631
# Phase log file: 'PSCVINIT.LOG'
..finished at 20130625102636 with status SUCCEEDED.
UPGRADEPHASE RUN_RSPTBFIL_PREP
...started at 20130625102637
# Phase log file: 'RSPTBINI.LOG'
..finished at 20130625102645 with SEVERE ERROR(S).
...begin dialogue at 20130625102645
...end dialogue at 20130625103305
...begin dialogue at 20130625103305
...end dialogue at 20130625103309
..answered at 20130625103309.
-> decided to retry.
UPGRADEPHASE RUN_RSPTBFIL_PREP
...started at 20130625103309
# Phase log file: 'RSPTBINI.LOG'
..finished at 20130625103314 with SEVERE ERROR(S).
...begin dialogue at 20130625103314
...end dialogue at 20130625103356
...begin dialogue at 20130625103356
...end dialogue at 20130625103400
..answered at 20130625103400.
-> decided to retry.
UPGRADEPHASE RUN_RSPTBFIL_PREP
...started at 20130625103400
# Phase log file: 'RSPTBINI.LOG'
..finished at 20130625103404 with SEVERE ERROR(S).
...begin dialogue at 20130625103404
...end dialogue at 20130625103622
...begin dialogue at 20130625103622
...end dialogue at 20130625103624
..answered at 20130625103624.
-> decided to retry.
UPGRADEPHASE RUN_RSPTBFIL_PREP
...started at 20130625103624
# Phase log file: 'RSPTBINI.LOG'
..finished at 20130625103629 with status SUCCEEDED.
UPGRADEPHASE READPUTTB_INI
...started at 20130625103629
# Phase log file: 'RDPUTTB.LOG'
..finished at 20130625103629 with SEVERE ERROR(S).
...begin dialogue at 20130625103629
...end dialogue at 20130625113232
...begin dialogue at 20130625113232
...end dialogue at 20130625113234
..answered at 20130625113234.
-> decided to retry.
UPGRADEPHASE READPUTTB_INI
...started at 20130625113234
# Phase log file: 'RDPUTTB.LOG'
..finished at 20130625113235 with SEVERE ERROR(S).
...begin dialogue at 20130625113235
...end dialogue at 20130625115316
...begin dialogue at 20130625115316
...end dialogue at 20130625115319
..answered at 20130625115319.
-> decided to retry.
UPGRADEPHASE READPUTTB_INI
...started at 20130625115319
# Phase log file: 'RDPUTTB.LOG'
..finished at 20130625115319 with SEVERE ERROR(S).
...begin dialogue at 20130625115319
...end dialogue at 20130625125111
...begin dialogue at 20130625125111
...end dialogue at 20130625125114
..answered at 20130625125114.
-> decided to retry.
UPGRADEPHASE READPUTTB_INI
...started at 20130625125114
# Phase log file: 'RDPUTTB.LOG'
..finished at 20130625125114 with SEVERE ERROR(S).
...begin dialogue at 20130625125114
...end dialogue at 20130625125304
...begin dialogue at 20130625125304
...end dialogue at 20130625125306
..answered at 20130625125306.
-> decided to retry.
UPGRADEPHASE READPUTTB_INI
...started at 20130625125306
# Phase log file: 'RDPUTTB.LOG'
..finished at 20130625125306 with SEVERE ERROR(S).
...begin dialogue at 20130625125306
...end dialogue at 20130625131111
...begin dialogue at 20130625131111
...end dialogue at 20130625131115
..answered at 20130625131115.
-> decided to retry.
UPGRADEPHASE READPUTTB_INI
...started at 20130625131115
# Phase log file: 'RDPUTTB.LOG'
...begin dialogue at 20130625131115
...end dialogue at 20130625131126
..finished at 20130625131126 with SEVERE ERROR(S).
...begin dialogue at 20130625131126
...end dialogue at 20130625131136
...begin dialogue at 20130625131137
...end dialogue at 20130625131138
..answered at 20130625131138.
-> decided to exit.
...CANCELED at 20130625131138.
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup version 7.00/3 patch level 25.026.
# Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
# Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20130625131146
...end dialogue at 20130625131149
...STARTED at 20130625131149.
# Environment for SAPup:
# SAPSID = PRD
# SAPHOST = MCVPRDDB
# STARTPATH = C:\usr\sap\PRD\SYS\exe\run
# KERNPATH = C:\usr\sap\PRD\SYS\exe\run
# PROFPATH = C:\usr\sap\PRD\SYS\profile
# LOCAL SLOG = C:\usr\sap\PRD\DVEBMGS30\log\SLOG30.LOG
# LOCAL SLOG (OLD) = C:\usr\sap\PRD\DVEBMGS30\log\SLOGO30.LOG
# CENTRAL SLOG =
# CENTRAL SLOG (OLD) =
# EPS INBOX = \\MCVPRDDB\sapmnt\trans\EPS\in
# EPS ROOT = \\MCVPRDDB\sapmnt\trans\EPS
# DBASID = PRD
# DBAHOST = MCVPRDDB
# DBAPWD = <NOT REPORTED>
# NR R3TRANS = 5
# NR R3LOAD = 1
# IMPORT DESTTIME = 86400
# STARTR3 = "startsap.exe"
# STARTPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STOPR3 = "stopsap.exe"
# STOPPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STARTDB = ""
# STARTPARAMS DB = " "
# STOPDB = ""
# STOPPARAMS DB = " "
# UPGRADE USER = prdadm
# UPGRADE LANGUAGE = E
# SLOGNAME = SLOG700
# ALOGNAME = ALOG700
# SYSNUM = 30
# PROFNAME = C:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS30_MCVPRDDB
# DDIC PWD = <NOT REPORTED>
# GATEWAY HOST = MCVPRDDB
# GATEWAY SERVICE = sapgw30
# MS INTERNAL SERVICE = 3930
# SLOW SHADOW IMPORT = Y
# MAX BUFREFTIME = 120
# BATCH HOST = MCVPRDDB
# NR BTC-PROCS INTERN = 3
# CUSTOMER GENERATION = 0
# SAP START PROFILE = START_DVEBMGS30_MCVPRDDB
# DEFPROFNAME = C:\usr\sap\PRD\SYS\profile\DEFAULT.PFL
# OSTYPE = Windows NT X86_64
# OSVERS = 5.2
# DESTVERS = 700
# COMPDESTVERS = EA-APPL=600,EA-DFPS=600,EA-FINSERV=600,EA-GLTRADE=600,EA-HR=600,EA-IPPE=400,EA-PS=600,EA-RETAIL=600,ECC-DIMP=600,ERECRUIT=600,FI-CA=600,FI-CAX=600,FINBASIS=600,INSURANCE=600,IS-CWM=600,IS-H=600,IS-M=600,IS-OIL=600,IS-PS-CA=600,IS-UT=600,LSOFE=600,PI_BASIS=2005_1_700,SAP_ABA=700,SAP_AP=700,SAP_APPL=600,SAP_BASIS=700,SAP_BW=700,SAP_HR=600,SEM-BW=600,ST-PI=2005_1_700
# SUBSTSTVERS = 700
# COMPSUBSTSTVERS = SAP_BASIS=700,SAP_ABA=700,SAP_APPL=600,SAP_HR=600,SAP_BW=700
# DESTPRODSHORTID = R/3
# DESTPRODSHORTREL = 700
# IMPORT LANGUAGES =
# DB REPSWITCH PAR = NOT_SPECIFIED
# PARALLEL DDLNTABS = 0
# TABLSIZE = 0
# KERNEL BIT SELECTION = 64 bit, no choice
# SHD INSTANCE NUMBER =
# SHD send d talk port = -1
# SHD send d listen port = -1
# SHD collect d listen port = -1
# SHD collect d talk port = -1
# SHD GW SERVICE =
# SHD MS INTERNAL SERVICE =
# SHD HOST =
# SHD GW HOST =
# SHD STARTPATH =
# SHD R3 START PROFILE =
# SHD PROFILE PATH =
# SHD PROFILE NAME =
# SHD startsap =
# SHD stopsap =
# SHD workpath =
# SHD kernpath =
# dba schema = dbo
# dba shd schema = dbo_shd
# connect env string = dbs_mss_schema
# REMOTE UPGRADE DIRECTORY =
# SAP SERVICE ACCOUNT = MCV-EG.COM\SAPServicePRD
# SAP SERVICE ACCOUNT PWD= <NOT REPORTED>
# Original shadow profile =
...begin dialogue at 20130625131152
...end dialogue at 20130625131156
...begin dialogue at 20130625131156
...end dialogue at 20130625131207
...begin dialogue at 20130625131207
...end dialogue at 20130625131209
...begin dialogue at 20130625131209
...end dialogue at 20130625131219
...begin dialogue at 20130625131220
...end dialogue at 20130625131221
Execution of PREPARE module Import begins at 20130625131221
UPGRADEPHASE
UPGRADEPHASE REQIMPORT
...started at 20130625131221
# Condition level 1, total => FALSE '#if "MSSQL" == "SAPDB"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB2-z/OS"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB2/400"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB6"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "INFORMIX"' => FALSE
# Condition level 1, total => TRUE '#elseif "MSSQL" == "MSSQL"' => TRUE
# Condition level 1, total => FALSE '#if "Windows NT X86_64" ~= "Linux"' => FALSE
# Condition level 1, total => FALSE '#elseif "Windows NT X86_64" ~= "Windows NT INTEL"' => FALSE
# Condition level 1, total => FALSE '#elseif "Windows NT X86_64" ~= "Windows NT IA64"' => FALSE
# Condition level 1, total => TRUE '#elseif "Windows NT X86_64" ~= "Windows NT X86_64"' => TRUE
...begin dialogue at 20130625131222
...end dialogue at 20130625131224
..finished at 20130625131224 with status SUCCEEDED.
UPGRADEPHASE READDATA
...started at 20130625131224
# Condition level 1, total => FALSE '#if 0' => FALSE
# Condition level 1, total => FALSE '#if ( 1 >= 0 ) && ( 1 <= 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( 1 >= 0 ) && ( 1 <= 0 )' => FALSE
# Condition level 1, total => TRUE '#if ( 0 == 0 ) && ("200" == "200")' => TRUE
# Condition level 1, total => FALSE '#if ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#elseif ( -1 >= 0 ) && ( -1 <= 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( 0 == 0 ) && ("200" == "110")' => FALSE
# Condition level 1, total => FALSE '#if ( 1 >= 0 ) && ( 1 <= 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( 1 >= 0 ) && ( 1 <= 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "0" == "1" )' => FALSE
# Condition level 1, total => FALSE '#if ( "0" == "1" )' => FALSE
# Info: data from toc file "MISCS1.TOC" extracted in the past
# Info: data from toc file "MISCS4.TOC" extracted in the past
..finished at 20130625131225 with status SUCCEEDED.
UPGRADEPHASE READDATA_EXT
...started at 20130625131225
# Info: data from toc file "MISCEXT1.TOC" extracted in the past
..finished at 20130625131225 with status SUCCEEDED.
UPGRADEPHASE TOOLFIX_CHK
...started at 20130625131225
# Phase log file: 'TOOLFIXCHK.LOG'
Correction package found
Correction package extracted
# TOOLFIX VERSION: 58
# TOOLFIX NAME: FIX_ERP2005SR3
# TOOLFIX DATE: 2013-4-16
..finished at 20130625131228 with status SUCCEEDED.
UPGRADEPHASE CPYFIL0_CBU
...started at 20130625131228
# Phase skipped due to condition 'CBU_only'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625131228 with status SUCCEEDED.
UPGRADEPHASE EXEC_CPYFIL1_CBU
...started at 20130625131228
# Phase skipped due to condition 'CBU_only'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625131228 with status SUCCEEDED.
UPGRADEPHASE FRP_CHK
...started at 20130625131228
# Phase skipped due to condition 'destcomponent=SCM'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625131228 with status SUCCEEDED.
UPGRADEPHASE UNICODELIB_CHK1
...started at 20130625131228
# Phase skipped due to condition 'UNICODE_only'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625131228 with status SUCCEEDED.
UPGRADEPHASE CNV_CHK_IMP
...started at 20130625131228
..finished at 20130625131230 with status SUCCEEDED.
UPGRADEPHASE ICNVCHK_IMP
...started at 20130625131230
# Phase log file: 'ICNVCHK.LOG'
..finished at 20130625131231 with status SUCCEEDED.
UPGRADEPHASE SCRIPT_CHK_TOOL3
...started at 20130625131231
# Phase skipped due to condition ST_range '*-31Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625131232 with status SUCCEEDED.
UPGRADEPHASE SCRIPT_CHK_TOOL4
...started at 20130625131232
# Phase log file: 'SCRIPTCHK.LOG'
..finished at 20130625131233 with status SUCCEEDED.
UPGRADEPHASE SCRIPT2_TST_RESTART
...started at 20130625131233
# Phase log file: 'SCRTREST.LOG'
..finished at 20130625131235 with status SUCCEEDED.
UPGRADEPHASE TRBATCHK_IMP
...started at 20130625131235
..finished at 20130625131236 with status SUCCEEDED.
UPGRADEPHASE CLNT_CHK_IMP
...started at 20130625131236
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
..finished at 20130625131242 with status SUCCEEDED.
UPGRADEPHASE INTCHK_IMP
...started at 20130625131242
..finished at 20130625131244 with status SUCCEEDED.
UPGRADEPHASE SPACECHK_IMP
...started at 20130625131244
# Phase log file: 'DBFPREP.LOG'
# Condition level 1, total => TRUE '#if 0 < 2' => TRUE
..finished at 20130625131244 with status SUCCEEDED.
UPGRADEPHASE PATCH_CHK2
...started at 20130625131245
# PATCHLEVEL OF "ABA_PLUS" = 15
# PATCHLEVEL OF "EA-APPL" = 9
# PATCHLEVEL OF "EA-DFPS" = 9
# PATCHLEVEL OF "EA-FINSERV" = 9
# PATCHLEVEL OF "EA-GLTRADE" = 9
# PATCHLEVEL OF "EA-HR" = 30
# PATCHLEVEL OF "EA-IPPE" = 17
# PATCHLEVEL OF "EA-PS" = 9
# PATCHLEVEL OF "EA-RETAIL" = 0
# PATCHLEVEL OF "PI" = 9
# PATCHLEVEL OF "PI_BASIS" = 7
# PATCHLEVEL OF "ST-A/PI" = 0
# PATCHLEVEL OF "ST-PI" = 7
# PATCHLEVEL OF "SAP_APPL" = 33
# PATCHLEVEL OF "SAP_HR" = 49
# PATCHLEVEL OF "SAP_BW" = 0
# PATCHLEVEL OF "SAP_APO" = 0
# PATCHLEVEL OF "SAP_BASIS" = 67
# PATCHLEVEL OF "SAP_ABA" = 67
# PATCHLEVEL OF "BBPCRM" = 0
# PATCHLEVEL OF "SCR" = 0
..finished at 20130625131251 with status SUCCEEDED.
UPGRADEPHASE NTHISTCRE
...started at 20130625131251
# Phase skipped due to condition ST_range '*-40B'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625131251 with status SUCCEEDED.
UPGRADEPHASE ALTER_TO
...started at 20130625131251
..finished at 20130625131303 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPD1
...started at 20130625131303
# Phase skipped due to condition ST_range '30D-31Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625131303 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPD2
...started at 20130625131303
# Phase skipped due to condition ST_range '40A-40Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625131303 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPD3
...started at 20130625131303
# Phase skipped due to condition ST_range '45A-46Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625131303 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPD4
...started at 20130625131303
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB6" ) && ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) ' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
...begin processing at 20130625131305
...tp-pid 7112
..finished at 20130625132100 with status SUCCEEDED.
UPGRADEPHASE MVNTAB_TOOL
...started at 20130625132100
# Phase log file: 'MVNTTOOL.LOG'
..finished at 20130625132846 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPI
...started at 20130625132846
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB6" ) && ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) ' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
...begin processing at 20130625132848
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup version 7.00/3 patch level 25.026.
# Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
# Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20130625152005
...end dialogue at 20130625152006
...STARTED at 20130625152006.
# Environment for SAPup:
# SAPSID = PRD
# SAPHOST = MCVPRDDB
# STARTPATH = C:\usr\sap\PRD\SYS\exe\run
# KERNPATH = C:\usr\sap\PRD\SYS\exe\run
# PROFPATH = C:\usr\sap\PRD\SYS\profile
# LOCAL SLOG = C:\usr\sap\PRD\DVEBMGS30\log\SLOG30.LOG
# LOCAL SLOG (OLD) = C:\usr\sap\PRD\DVEBMGS30\log\SLOGO30.LOG
# CENTRAL SLOG =
# CENTRAL SLOG (OLD) =
# EPS INBOX = \\MCVPRDDB\sapmnt\trans\EPS\in
# EPS ROOT = \\MCVPRDDB\sapmnt\trans\EPS
# DBASID = PRD
# DBAHOST = MCVPRDDB
# DBAPWD = <NOT REPORTED>
# NR R3TRANS = 5
# NR R3LOAD = 1
# IMPORT DESTTIME = 86400
# STARTR3 = "startsap.exe"
# STARTPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STOPR3 = "stopsap.exe"
# STOPPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STARTDB = ""
# STARTPARAMS DB = " "
# STOPDB = ""
# STOPPARAMS DB = " "
# UPGRADE USER = prdadm
# UPGRADE LANGUAGE = E
# SLOGNAME = SLOG700
# ALOGNAME = ALOG700
# SYSNUM = 30
# PROFNAME = C:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS30_MCVPRDDB
# DDIC PWD = <NOT REPORTED>
# GATEWAY HOST = MCVPRDDB
# GATEWAY SERVICE = sapgw30
# MS INTERNAL SERVICE = 3930
# SLOW SHADOW IMPORT = Y
# MAX BUFREFTIME = 120
# BATCH HOST = MCVPRDDB
# NR BTC-PROCS INTERN = 3
# CUSTOMER GENERATION = 0
# SAP START PROFILE = START_DVEBMGS30_MCVPRDDB
# DEFPROFNAME = C:\usr\sap\PRD\SYS\profile\DEFAULT.PFL
# OSTYPE = Windows NT X86_64
# OSVERS = 5.2
# DESTVERS = 700
# COMPDESTVERS = EA-APPL=600,EA-DFPS=600,EA-FINSERV=600,EA-GLTRADE=600,EA-HR=600,EA-IPPE=400,EA-PS=600,EA-RETAIL=600,ECC-DIMP=600,ERECRUIT=600,FI-CA=600,FI-CAX=600,FINBASIS=600,INSURANCE=600,IS-CWM=600,IS-H=600,IS-M=600,IS-OIL=600,IS-PS-CA=600,IS-UT=600,LSOFE=600,PI_BASIS=2005_1_700,SAP_ABA=700,SAP_AP=700,SAP_APPL=600,SAP_BASIS=700,SAP_BW=700,SAP_HR=600,SEM-BW=600,ST-PI=2005_1_700
# SUBSTSTVERS = 700
# COMPSUBSTSTVERS = SAP_BASIS=700,SAP_ABA=700,SAP_APPL=600,SAP_HR=600,SAP_BW=700
# DESTPRODSHORTID = R/3
# DESTPRODSHORTREL = 700
# IMPORT LANGUAGES =
# DB REPSWITCH PAR = NOT_SPECIFIED
# PARALLEL DDLNTABS = 0
# TABLSIZE = 0
# KERNEL BIT SELECTION = 64 bit, no choice
# SHD INSTANCE NUMBER =
# SHD send d talk port = -1
# SHD send d listen port = -1
# SHD collect d listen port = -1
# SHD collect d talk port = -1
# SHD GW SERVICE =
# SHD MS INTERNAL SERVICE =
# SHD HOST =
# SHD GW HOST =
# SHD STARTPATH =
# SHD R3 START PROFILE =
# SHD PROFILE PATH =
# SHD PROFILE NAME =
# SHD startsap =
# SHD stopsap =
# SHD workpath =
# SHD kernpath =
# dba schema = dbo
# dba shd schema = dbo_shd
# connect env string = dbs_mss_schema
# REMOTE UPGRADE DIRECTORY =
# SAP SERVICE ACCOUNT = MCV-EG.COM\SAPServicePRD
# SAP SERVICE ACCOUNT PWD= <NOT REPORTED>
# Original shadow profile =
...begin dialogue at 20130625152010
...end dialogue at 20130625152013
UPGRADEPHASE TOOLIMPI
...started at 20130625152013
# Condition level 1, total => FALSE '#if "MSSQL" == "SAPDB"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB2-z/OS"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB2/400"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB6"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "INFORMIX"' => FALSE
# Condition level 1, total => TRUE '#elseif "MSSQL" == "MSSQL"' => TRUE
# Condition level 1, total => FALSE '#if "Windows NT X86_64" ~= "Linux"' => FALSE
# Condition level 1, total => FALSE '#elseif "Windows NT X86_64" ~= "Windows NT INTEL"' => FALSE
# Condition level 1, total => FALSE '#elseif "Windows NT X86_64" ~= "Windows NT IA64"' => FALSE
# Condition level 1, total => TRUE '#elseif "Windows NT X86_64" ~= "Windows NT X86_64"' => TRUE
...begin processing at 20130625152014
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup version 7.00/3 patch level 25.026.
# Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
# Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20130625152148
...end dialogue at 20130625152150
...STARTED at 20130625152150.
# Environment for SAPup:
# SAPSID = PRD
# SAPHOST = MCVPRDDB
# STARTPATH = C:\usr\sap\PRD\SYS\exe\run
# KERNPATH = C:\usr\sap\PRD\SYS\exe\run
# PROFPATH = C:\usr\sap\PRD\SYS\profile
# LOCAL SLOG = C:\usr\sap\PRD\DVEBMGS30\log\SLOG30.LOG
# LOCAL SLOG (OLD) = C:\usr\sap\PRD\DVEBMGS30\log\SLOGO30.LOG
# CENTRAL SLOG =
# CENTRAL SLOG (OLD) =
# EPS INBOX = \\MCVPRDDB\sapmnt\trans\EPS\in
# EPS ROOT = \\MCVPRDDB\sapmnt\trans\EPS
# DBASID = PRD
# DBAHOST = MCVPRDDB
# DBAPWD = <NOT REPORTED>
# NR R3TRANS = 5
# NR R3LOAD = 1
# IMPORT DESTTIME = 86400
# STARTR3 = "startsap.exe"
# STARTPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STOPR3 = "stopsap.exe"
# STOPPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STARTDB = ""
# STARTPARAMS DB = " "
# STOPDB = ""
# STOPPARAMS DB = " "
# UPGRADE USER = prdadm
# UPGRADE LANGUAGE = E
# SLOGNAME = SLOG700
# ALOGNAME = ALOG700
# SYSNUM = 30
# PROFNAME = C:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS30_MCVPRDDB
# DDIC PWD = <NOT REPORTED>
# GATEWAY HOST = MCVPRDDB
# GATEWAY SERVICE = sapgw30
# MS INTERNAL SERVICE = 3930
# SLOW SHADOW IMPORT = Y
# MAX BUFREFTIME = 120
# BATCH HOST = MCVPRDDB
# NR BTC-PROCS INTERN = 3
# CUSTOMER GENERATION = 0
# SAP START PROFILE = START_DVEBMGS30_MCVPRDDB
# DEFPROFNAME = C:\usr\sap\PRD\SYS\profile\DEFAULT.PFL
# OSTYPE = Windows NT X86_64
# OSVERS = 5.2
# DESTVERS = 700
# COMPDESTVERS = EA-APPL=600,EA-DFPS=600,EA-FINSERV=600,EA-GLTRADE=600,EA-HR=600,EA-IPPE=400,EA-PS=600,EA-RETAIL=600,ECC-DIMP=600,ERECRUIT=600,FI-CA=600,FI-CAX=600,FINBASIS=600,INSURANCE=600,IS-CWM=600,IS-H=600,IS-M=600,IS-OIL=600,IS-PS-CA=600,IS-UT=600,LSOFE=600,PI_BASIS=2005_1_700,SAP_ABA=700,SAP_AP=700,SAP_APPL=600,SAP_BASIS=700,SAP_BW=700,SAP_HR=600,SEM-BW=600,ST-PI=2005_1_700
# SUBSTSTVERS = 700
# COMPSUBSTSTVERS = SAP_BASIS=700,SAP_ABA=700,SAP_APPL=600,SAP_HR=600,SAP_BW=700
# DESTPRODSHORTID = R/3
# DESTPRODSHORTREL = 700
# IMPORT LANGUAGES =
# DB REPSWITCH PAR = NOT_SPECIFIED
# PARALLEL DDLNTABS = 0
# TABLSIZE = 0
# KERNEL BIT SELECTION = 64 bit, no choice
# SHD INSTANCE NUMBER =
# SHD send d talk port = -1
# SHD send d listen port = -1
# SHD collect d listen port = -1
# SHD collect d talk port = -1
# SHD GW SERVICE =
# SHD MS INTERNAL SERVICE =
# SHD HOST =
# SHD GW HOST =
# SHD STARTPATH =
# SHD R3 START PROFILE =
# SHD PROFILE PATH =
# SHD PROFILE NAME =
# SHD startsap =
# SHD stopsap =
# SHD workpath =
# SHD kernpath =
# dba schema = dbo
# dba shd schema = dbo_shd
# connect env string = dbs_mss_schema
# REMOTE UPGRADE DIRECTORY =
# SAP SERVICE ACCOUNT = MCV-EG.COM\SAPServicePRD
# SAP SERVICE ACCOUNT PWD= <NOT REPORTED>
# Original shadow profile =
...begin dialogue at 20130625152153
...end dialogue at 20130625152215
...begin dialogue at 20130625152215
...end dialogue at 20130625152223
UPGRADEPHASE TOOLIMPI
...started at 20130625152223
# Condition level 1, total => FALSE '#if "MSSQL" == "SAPDB"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB2-z/OS"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB2/400"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB6"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "INFORMIX"' => FALSE
# Condition level 1, total => TRUE '#elseif "MSSQL" == "MSSQL"' => TRUE
# Condition level 1, total => FALSE '#if "Windows NT X86_64" ~= "Linux"' => FALSE
# Condition level 1, total => FALSE '#elseif "Windows NT X86_64" ~= "Windows NT INTEL"' => FALSE
# Condition level 1, total => FALSE '#elseif "Windows NT X86_64" ~= "Windows NT IA64"' => FALSE
# Condition level 1, total => TRUE '#elseif "Windows NT X86_64" ~= "Windows NT X86_64"' => TRUE
...begin processing at 20130625152224
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup version 7.00/3 patch level 25.026.
# Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
# Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20130625152358
...end dialogue at 20130625152400
...STARTED at 20130625152400.
# Environment for SAPup:
# SAPSID = PRD
# SAPHOST = MCVPRDDB
# STARTPATH = C:\usr\sap\PRD\SYS\exe\run
# KERNPATH = C:\usr\sap\PRD\SYS\exe\run
# PROFPATH = C:\usr\sap\PRD\SYS\profile
# LOCAL SLOG = C:\usr\sap\PRD\DVEBMGS30\log\SLOG30.LOG
# LOCAL SLOG (OLD) = C:\usr\sap\PRD\DVEBMGS30\log\SLOGO30.LOG
# CENTRAL SLOG =
# CENTRAL SLOG (OLD) =
# EPS INBOX = \\MCVPRDDB\sapmnt\trans\EPS\in
# EPS ROOT = \\MCVPRDDB\sapmnt\trans\EPS
# DBASID = PRD
# DBAHOST = MCVPRDDB
# DBAPWD = <NOT REPORTED>
# NR R3TRANS = 5
# NR R3LOAD = 1
# IMPORT DESTTIME = 86400
# STARTR3 = "startsap.exe"
# STARTPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STOPR3 = "stopsap.exe"
# STOPPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STARTDB = ""
# STARTPARAMS DB = " "
# STOPDB = ""
# STOPPARAMS DB = " "
# UPGRADE USER = prdadm
# UPGRADE LANGUAGE = E
# SLOGNAME = SLOG700
# ALOGNAME = ALOG700
# SYSNUM = 30
# PROFNAME = C:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS30_MCVPRDDB
# DDIC PWD = <NOT REPORTED>
# GATEWAY HOST = MCVPRDDB
# GATEWAY SERVICE = sapgw30
# MS INTERNAL SERVICE = 3930
# SLOW SHADOW IMPORT = Y
# MAX BUFREFTIME = 120
# BATCH HOST = MCVPRDDB
# NR BTC-PROCS INTERN = 3
# CUSTOMER GENERATION = 0
# SAP START PROFILE = START_DVEBMGS30_MCVPRDDB
# DEFPROFNAME = C:\usr\sap\PRD\SYS\profile\DEFAULT.PFL
# OSTYPE = Windows NT X86_64
# OSVERS = 5.2
# DESTVERS = 700
# COMPDESTVERS = EA-APPL=600,EA-DFPS=600,EA-FINSERV=600,EA-GLTRADE=600,EA-HR=600,EA-IPPE=400,EA-PS=600,EA-RETAIL=600,ECC-DIMP=600,ERECRUIT=600,FI-CA=600,FI-CAX=600,FINBASIS=600,INSURANCE=600,IS-CWM=600,IS-H=600,IS-M=600,IS-OIL=600,IS-PS-CA=600,IS-UT=600,LSOFE=600,PI_BASIS=2005_1_700,SAP_ABA=700,SAP_AP=700,SAP_APPL=600,SAP_BASIS=700,SAP_BW=700,SAP_HR=600,SEM-BW=600,ST-PI=2005_1_700
# SUBSTSTVERS = 700
# COMPSUBSTSTVERS = SAP_BASIS=700,SAP_ABA=700,SAP_APPL=600,SAP_HR=600,SAP_BW=700
# DESTPRODSHORTID = R/3
# DESTPRODSHORTREL = 700
# IMPORT LANGUAGES =
# DB REPSWITCH PAR = NOT_SPECIFIED
# PARALLEL DDLNTABS = 0
# TABLSIZE = 0
# KERNEL BIT SELECTION = 64 bit, no choice
# SHD INSTANCE NUMBER =
# SHD send d talk port = -1
# SHD send d listen port = -1
# SHD collect d listen port = -1
# SHD collect d talk port = -1
# SHD GW SERVICE =
# SHD MS INTERNAL SERVICE =
# SHD HOST =
# SHD GW HOST =
# SHD STARTPATH =
# SHD R3 START PROFILE =
# SHD PROFILE PATH =
# SHD PROFILE NAME =
# SHD startsap =
# SHD stopsap =
# SHD workpath =
# SHD kernpath =
# dba schema = dbo
# dba shd schema = dbo_shd
# connect env string = dbs_mss_schema
# REMOTE UPGRADE DIRECTORY =
# SAP SERVICE ACCOUNT = MCV-EG.COM\SAPServicePRD
# SAP SERVICE ACCOUNT PWD= <NOT REPORTED>
# Original shadow profile =
...begin dialogue at 20130625152403
...end dialogue at 20130625152415
...begin dialogue at 20130625152415
...end dialogue at 20130625152418
UPGRADEPHASE TOOLIMPI
...started at 20130625152418
# Condition level 1, total => FALSE '#if "MSSQL" == "SAPDB"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB2-z/OS"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB2/400"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB6"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "INFORMIX"' => FALSE
# Condition level 1, total => TRUE '#elseif "MSSQL" == "MSSQL"' => TRUE
# Condition level 1, total => FALSE '#if "Windows NT X86_64" ~= "Linux"' => FALSE
# Condition level 1, total => FALSE '#elseif "Windows NT X86_64" ~= "Windows NT INTEL"' => FALSE
# Condition level 1, total => FALSE '#elseif "Windows NT X86_64" ~= "Windows NT IA64"' => FALSE
# Condition level 1, total => TRUE '#elseif "Windows NT X86_64" ~= "Windows NT X86_64"' => TRUE
...begin processing at 20130625152418
...tp-pid 4080
..finished at 20130625152421 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPM
...started at 20130625152632
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB6" ) && ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) ' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
...begin processing at 20130625152633
...tp-pid 5248
..finished at 20130625152714 with status SUCCEEDED.
UPGRADEPHASE TOOLIMP4_UCMIG
...started at 20130625152714
# Phase skipped due to condition ST_range '46C-46Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625152715 with status SUCCEEDED.
UPGRADEPHASE TOOLIMP4_FIX
...started at 20130625152715
# Phase skipped due to condition ST_range '*-46Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625152715 with status SUCCEEDED.
UPGRADEPHASE TOOLIMP6_FIX
...started at 20130625152715
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB6" ) && ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) ' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
...begin processing at 20130625152716
...tp-pid 3164
..finished at 20130625152745 with status SUCCEEDED.
UPGRADEPHASE NPREPCRE0
...started at 20130625152745
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB6" ) && ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) ' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
...begin processing at 20130625152746
...tp-pid 3948
..finished at 20130625154709 with status SUCCEEDED.
UPGRADEPHASE JOB_RSUVSAVE
...started at 20130625154709
# Phase log file: 'PSUVSAVE.LOG'
..finished at 20130625154715 with status SUCCEEDED.
UPGRADEPHASE UVERS_PREIMP
...started at 20130625154715
..finished at 20130625154715 with status SUCCEEDED.
UPGRADEPHASE UVERS_INIT
...started at 20130625154716
..finished at 20130625154719 with status SUCCEEDED.
UPGRADEPHASE SQLDB_UVERS_INIT
...started at 20130625154719
# Phase skipped due to condition ST_range '*-46A'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625154719 with status SUCCEEDED.
UPGRADEPHASE UVERS_CHK_IMP
...started at 20130625154719
# Phase log file: 'UVERSCHK_IMP.LOG'
..finished at 20130625154719 with status SUCCEEDED.
UPGRADEPHASE BATCHCHK_IMP
...started at 20130625154719
# Phase log file: 'BATCHCHK_IMP.LOG'
..finished at 20130625154725 with status SUCCEEDED.
UPGRADEPHASE SQLDB_UCMIG
...started at 20130625154725
# Phase skipped due to condition 'UCMIG_INTEGRATED'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625154725 with status SUCCEEDED.
UPGRADEPHASE UCMIG_STATUS_SET0
...started at 20130625154725
# Phase skipped due to condition 'UCMIG_INTEGRATED'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625154725 with status SUCCEEDED.
UPGRADEPHASE JOB_RSCVINIT
...started at 20130625154725
# Phase log file: 'PSCVINIT.LOG'
..finished at 20130625154731 with status SUCCEEDED.
UPGRADEPHASE RUN_RSPTBFIL_PREP
...started at 20130625154731
# Phase log file: 'RSPTBINI.LOG'
..finished at 20130625154738 with SEVERE ERROR(S).
...begin dialogue at 20130625154738
...end dialogue at 20130625162550
...begin dialogue at 20130625162550
...end dialogue at 20130625162558
..answered at 20130625162558.
-> decided to retry.
UPGRADEPHASE RUN_RSPTBFIL_PREP
...started at 20130625162558
# Phase log file: 'RSPTBINI.LOG'
..finished at 20130625162603 with SEVERE ERROR(S).
...begin dialogue at 20130625162603
...end dialogue at 20130625163200
...begin dialogue at 20130625163200
...end dialogue at 20130625163203
..answered at 20130625163203.
-> decided to retry.
UPGRADEPHASE RUN_RSPTBFIL_PREP
...started at 20130625163203
# Phase log file: 'RSPTBINI.LOG'
..finished at 20130625163208 with status SUCCEEDED.
UPGRADEPHASE READPUTTB_INI
...started at 20130625163208
# Phase log file: 'RDPUTTB.LOG'
..finished at 20130625163208 with SEVERE ERROR(S).
...begin dialogue at 20130625163208
...end dialogue at 20130625165727
...begin dialogue at 20130625165727
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup version 7.00/3 patch level 25.026.
# Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
# Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20130625165948
...end dialogue at 20130625165950
...STARTED at 20130625165950.
# Environment for SAPup:
# SAPSID = PRD
# SAPHOST = MCVPRDDB
# STARTPATH = C:\usr\sap\PRD\SYS\exe\run
# KERNPATH = C:\usr\sap\PRD\SYS\exe\run
# PROFPATH = C:\usr\sap\PRD\SYS\profile
# LOCAL SLOG = C:\usr\sap\PRD\DVEBMGS30\log\SLOG30.LOG
# LOCAL SLOG (OLD) = C:\usr\sap\PRD\DVEBMGS30\log\SLOGO30.LOG
# CENTRAL SLOG =
# CENTRAL SLOG (OLD) =
# EPS INBOX = \\MCVPRDDB\sapmnt\trans\EPS\in
# EPS ROOT = \\MCVPRDDB\sapmnt\trans\EPS
# DBASID = PRD
# DBAHOST = MCVPRDDB
# DBAPWD = <NOT REPORTED>
# NR R3TRANS = 5
# NR R3LOAD = 1
# IMPORT DESTTIME = 86400
# STARTR3 = "startsap.exe"
# STARTPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STOPR3 = "stopsap.exe"
# STOPPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STARTDB = ""
# STARTPARAMS DB = " "
# STOPDB = ""
# STOPPARAMS DB = " "
# UPGRADE USER = prdadm
# UPGRADE LANGUAGE = E
# SLOGNAME = SLOG700
# ALOGNAME = ALOG700
# SYSNUM = 30
# PROFNAME = C:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS30_MCVPRDDB
# DDIC PWD = <NOT REPORTED>
# GATEWAY HOST = MCVPRDDB
# GATEWAY SERVICE = sapgw30
# MS INTERNAL SERVICE = 3930
# SLOW SHADOW IMPORT = Y
# MAX BUFREFTIME = 120
# BATCH HOST = MCVPRDDB
# NR BTC-PROCS INTERN = 3
# CUSTOMER GENERATION = 0
# SAP START PROFILE = START_DVEBMGS30_MCVPRDDB
# DEFPROFNAME = C:\usr\sap\PRD\SYS\profile\DEFAULT.PFL
# OSTYPE = Windows NT X86_64
# OSVERS = 5.2
# DESTVERS = 700
# COMPDESTVERS = EA-APPL=600,EA-DFPS=600,EA-FINSERV=600,EA-GLTRADE=600,EA-HR=600,EA-IPPE=400,EA-PS=600,EA-RETAIL=600,ECC-DIMP=600,ERECRUIT=600,FI-CA=600,FI-CAX=600,FINBASIS=600,INSURANCE=600,IS-CWM=600,IS-H=600,IS-M=600,IS-OIL=600,IS-PS-CA=600,IS-UT=600,LSOFE=600,PI_BASIS=2005_1_700,SAP_ABA=700,SAP_AP=700,SAP_APPL=600,SAP_BASIS=700,SAP_BW=700,SAP_HR=600,SEM-BW=600,ST-PI=2005_1_700
# SUBSTSTVERS = 700
# COMPSUBSTSTVERS = SAP_BASIS=700,SAP_ABA=700,SAP_APPL=600,SAP_HR=600,SAP_BW=700
# DESTPRODSHORTID = R/3
# DESTPRODSHORTREL = 700
# IMPORT LANGUAGES =
# DB REPSWITCH PAR = NOT_SPECIFIED
# PARALLEL DDLNTABS = 0
# TABLSIZE = 0
# KERNEL BIT SELECTION = 64 bit, no choice
# SHD INSTANCE NUMBER =
# SHD send d talk port = -1
# SHD send d listen port = -1
# SHD collect d listen port = -1
# SHD collect d talk port = -1
# SHD GW SERVICE =
# SHD MS INTERNAL SERVICE =
# SHD HOST =
# SHD GW HOST =
# SHD STARTPATH =
# SHD R3 START PROFILE =
# SHD PROFILE PATH =
# SHD PROFILE NAME =
# SHD startsap =
# SHD stopsap =
# SHD workpath =
# SHD kernpath =
# dba schema = dbo
# dba shd schema = dbo_shd
# connect env string = dbs_mss_schema
# REMOTE UPGRADE DIRECTORY =
# SAP SERVICE ACCOUNT = MCV-EG.COM\SAPServicePRD
# SAP SERVICE ACCOUNT PWD= <NOT REPORTED>
# Original shadow profile =
...begin dialogue at 20130625165953
...end dialogue at 20130625170001
...begin dialogue at 20130625170001
...end dialogue at 20130625170004
...begin dialogue at 20130625170004
...end dialogue at 20130625170006
...begin dialogue at 20130625170006
...end dialogue at 20130625170015
...begin dialogue at 20130625170016
...end dialogue at 20130625170019
Execution of PREPARE module Import begins at 20130625170019
UPGRADEPHASE
UPGRADEPHASE REQIMPORT
...started at 20130625170019
# Condition level 1, total => FALSE '#if "MSSQL" == "SAPDB"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB2-z/OS"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB2/400"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB6"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "INFORMIX"' => FALSE
# Condition level 1, total => TRUE '#elseif "MSSQL" == "MSSQL"' => TRUE
# Condition level 1, total => FALSE '#if "Windows NT X86_64" ~= "Linux"' => FALSE
# Condition level 1, total => FALSE '#elseif "Windows NT X86_64" ~= "Windows NT INTEL"' => FALSE
# Condition level 1, total => FALSE '#elseif "Windows NT X86_64" ~= "Windows NT IA64"' => FALSE
# Condition level 1, total => TRUE '#elseif "Windows NT X86_64" ~= "Windows NT X86_64"' => TRUE
...begin dialogue at 20130625170019
...end dialogue at 20130625170021
..finished at 20130625170021 with status SUCCEEDED.
UPGRADEPHASE READDATA
...started at 20130625170021
# Condition level 1, total => FALSE '#if 0' => FALSE
# Condition level 1, total => FALSE '#if ( 1 >= 0 ) && ( 1 <= 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( 1 >= 0 ) && ( 1 <= 0 )' => FALSE
# Condition level 1, total => TRUE '#if ( 0 == 0 ) && ("200" == "200")' => TRUE
# Condition level 1, total => FALSE '#if ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#elseif ( -1 >= 0 ) && ( -1 <= 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( 0 == 0 ) && ("200" == "110")' => FALSE
# Condition level 1, total => FALSE '#if ( 1 >= 0 ) && ( 1 <= 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( 1 >= 0 ) && ( 1 <= 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "0" == "1" )' => FALSE
# Condition level 1, total => FALSE '#if ( "0" == "1" )' => FALSE
# Info: data from toc file "MISCS1.TOC" extracted in the past
# Info: data from toc file "MISCS4.TOC" extracted in the past
..finished at 20130625170021 with status SUCCEEDED.
UPGRADEPHASE READDATA_EXT
...started at 20130625170021
# Info: data from toc file "MISCEXT1.TOC" extracted in the past
..finished at 20130625170022 with status SUCCEEDED.
UPGRADEPHASE TOOLFIX_CHK
...started at 20130625170022
# Phase log file: 'TOOLFIXCHK.LOG'
Correction package found
Correction package extracted
# TOOLFIX VERSION: 58
# TOOLFIX NAME: FIX_ERP2005SR3
# TOOLFIX DATE: 2013-4-16
..finished at 20130625170024 with status SUCCEEDED.
UPGRADEPHASE CPYFIL0_CBU
...started at 20130625170024
# Phase skipped due to condition 'CBU_only'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625170024 with status SUCCEEDED.
UPGRADEPHASE EXEC_CPYFIL1_CBU
...started at 20130625170024
# Phase skipped due to condition 'CBU_only'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625170024 with status SUCCEEDED.
UPGRADEPHASE FRP_CHK
...started at 20130625170024
# Phase skipped due to condition 'destcomponent=SCM'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625170024 with status SUCCEEDED.
UPGRADEPHASE UNICODELIB_CHK1
...started at 20130625170025
# Phase skipped due to condition 'UNICODE_only'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625170025 with status SUCCEEDED.
UPGRADEPHASE CNV_CHK_IMP
...started at 20130625170025
..finished at 20130625170026 with status SUCCEEDED.
UPGRADEPHASE ICNVCHK_IMP
...started at 20130625170026
# Phase log file: 'ICNVCHK.LOG'
..finished at 20130625170027 with status SUCCEEDED.
UPGRADEPHASE SCRIPT_CHK_TOOL3
...started at 20130625170027
# Phase skipped due to condition ST_range '*-31Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625170027 with status SUCCEEDED.
UPGRADEPHASE SCRIPT_CHK_TOOL4
...started at 20130625170027
# Phase log file: 'SCRIPTCHK.LOG'
..finished at 20130625170029 with status SUCCEEDED.
UPGRADEPHASE SCRIPT2_TST_RESTART
...started at 20130625170029
# Phase log file: 'SCRTREST.LOG'
..finished at 20130625170030 with status SUCCEEDED.
UPGRADEPHASE TRBATCHK_IMP
...started at 20130625170030
..finished at 20130625170031 with status SUCCEEDED.
UPGRADEPHASE CLNT_CHK_IMP
...started at 20130625170031
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
..finished at 20130625170037 with status SUCCEEDED.
UPGRADEPHASE INTCHK_IMP
...started at 20130625170037
..finished at 20130625170038 with status SUCCEEDED.
UPGRADEPHASE SPACECHK_IMP
...started at 20130625170038
# Phase log file: 'DBFPREP.LOG'
# Condition level 1, total => TRUE '#if 0 < 2' => TRUE
..finished at 20130625170039 with status SUCCEEDED.
UPGRADEPHASE PATCH_CHK2
...started at 20130625170039
# PATCHLEVEL OF "ABA_PLUS" = 15
# PATCHLEVEL OF "EA-APPL" = 9
# PATCHLEVEL OF "EA-DFPS" = 9
# PATCHLEVEL OF "EA-FINSERV" = 9
# PATCHLEVEL OF "EA-GLTRADE" = 9
# PATCHLEVEL OF "EA-HR" = 30
# PATCHLEVEL OF "EA-IPPE" = 17
# PATCHLEVEL OF "EA-PS" = 9
# PATCHLEVEL OF "EA-RETAIL" = 0
# PATCHLEVEL OF "PI" = 9
# PATCHLEVEL OF "PI_BASIS" = 7
# PATCHLEVEL OF "ST-A/PI" = 0
# PATCHLEVEL OF "ST-PI" = 7
# PATCHLEVEL OF "SAP_APPL" = 33
# PATCHLEVEL OF "SAP_HR" = 49
# PATCHLEVEL OF "SAP_BW" = 0
# PATCHLEVEL OF "SAP_APO" = 0
# PATCHLEVEL OF "SAP_BASIS" = 67
# PATCHLEVEL OF "SAP_ABA" = 67
# PATCHLEVEL OF "BBPCRM" = 0
# PATCHLEVEL OF "SCR" = 0
..finished at 20130625170045 with status SUCCEEDED.
UPGRADEPHASE NTHISTCRE
...started at 20130625170045
# Phase skipped due to condition ST_range '*-40B'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625170045 with status SUCCEEDED.
UPGRADEPHASE ALTER_TO
...started at 20130625170045
..finished at 20130625170052 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPD1
...started at 20130625170052
# Phase skipped due to condition ST_range '30D-31Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625170052 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPD2
...started at 20130625170052
# Phase skipped due to condition ST_range '40A-40Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625170052 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPD3
...started at 20130625170052
# Phase skipped due to condition ST_range '45A-46Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625170052 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPD4
...started at 20130625170052
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB6" ) && ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) ' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
...begin processing at 20130625170053
...tp-pid 3636
..finished at 20130625170400 with status SUCCEEDED.
UPGRADEPHASE MVNTAB_TOOL
...started at 20130625170400
# Phase log file: 'MVNTTOOL.LOG'
..finished at 20130625170819 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPI
...started at 20130625170819
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB6" ) && ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) ' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
...begin processing at 20130625170820
...tp-pid 3568
..finished at 20130625172740 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPM
...started at 20130625172950
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB6" ) && ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) ' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
...begin processing at 20130625172951
...tp-pid 3228
..finished at 20130625173009 with status SUCCEEDED.
UPGRADEPHASE TOOLIMP4_UCMIG
...started at 20130625173009
# Phase skipped due to condition ST_range '46C-46Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625173009 with status SUCCEEDED.
UPGRADEPHASE TOOLIMP4_FIX
...started at 20130625173009
# Phase skipped due to condition ST_range '*-46Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625173010 with status SUCCEEDED.
UPGRADEPHASE TOOLIMP6_FIX
...started at 20130625173010
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB6" ) && ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) ' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
...begin processing at 20130625173010
...tp-pid 7056
..finished at 20130625173034 with status SUCCEEDED.
UPGRADEPHASE NPREPCRE0
...started at 20130625173034
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB6" ) && ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) ' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
...begin processing at 20130625173035
...tp-pid 6660
..finished at 20130625174537 with status SUCCEEDED.
UPGRADEPHASE JOB_RSUVSAVE
...started at 20130625174537
# Phase log file: 'PSUVSAVE.LOG'
..finished at 20130625174544 with status SUCCEEDED.
UPGRADEPHASE UVERS_PREIMP
...started at 20130625174544
..finished at 20130625174544 with status SUCCEEDED.
UPGRADEPHASE UVERS_INIT
...started at 20130625174544
..finished at 20130625174547 with status SUCCEEDED.
UPGRADEPHASE SQLDB_UVERS_INIT
...started at 20130625174547
# Phase skipped due to condition ST_range '*-46A'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625174547 with status SUCCEEDED.
UPGRADEPHASE UVERS_CHK_IMP
...started at 20130625174547
# Phase log file: 'UVERSCHK_IMP.LOG'
..finished at 20130625174547 with status SUCCEEDED.
UPGRADEPHASE BATCHCHK_IMP
...started at 20130625174548
# Phase log file: 'BATCHCHK_IMP.LOG'
..finished at 20130625174553 with status SUCCEEDED.
UPGRADEPHASE SQLDB_UCMIG
...started at 20130625174553
# Phase skipped due to condition 'UCMIG_INTEGRATED'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625174553 with status SUCCEEDED.
UPGRADEPHASE UCMIG_STATUS_SET0
...started at 20130625174553
# Phase skipped due to condition 'UCMIG_INTEGRATED'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130625174553 with status SUCCEEDED.
UPGRADEPHASE JOB_RSCVINIT
...started at 20130625174553
# Phase log file: 'PSCVINIT.LOG'
..finished at 20130625174559 with status SUCCEEDED.
UPGRADEPHASE RUN_RSPTBFIL_PREP
...started at 20130625174559
# Phase log file: 'RSPTBINI.LOG'
..finished at 20130625174606 with SEVERE ERROR(S).
...begin dialogue at 20130625174606
...end dialogue at 20130626125644
...begin dialogue at 20130626125644
...end dialogue at 20130626125648
..answered at 20130626125648.
-> decided to retry.
UPGRADEPHASE RUN_RSPTBFIL_PREP
...started at 20130626125648
# Phase log file: 'RSPTBINI.LOG'
..finished at 20130626125652 with SEVERE ERROR(S).
...begin dialogue at 20130626125652
...end dialogue at 20130626125722
...begin dialogue at 20130626125722
...end dialogue at 20130626125727
..answered at 20130626125727.
-> decided to retry.
UPGRADEPHASE RUN_RSPTBFIL_PREP
...started at 20130626125727
# Phase log file: 'RSPTBINI.LOG'
..finished at 20130626125731 with SEVERE ERROR(S).
...begin dialogue at 20130626125731
...end dialogue at 20130626125915
...begin dialogue at 20130626125915
...end dialogue at 20130626125917
..answered at 20130626125917.
-> decided to retry.
UPGRADEPHASE RUN_RSPTBFIL_PREP
...started at 20130626125917
# Phase log file: 'RSPTBINI.LOG'
..finished at 20130626125922 with SEVERE ERROR(S).
...begin dialogue at 20130626125922
...end dialogue at 20130626130030
...begin dialogue at 20130626130030
...end dialogue at 20130626130033
..answered at 20130626130033.
-> decided to retry.
UPGRADEPHASE RUN_RSPTBFIL_PREP
...started at 20130626130033
# Phase log file: 'RSPTBINI.LOG'
..finished at 20130626130038 with SEVERE ERROR(S).
...begin dialogue at 20130626130038
...end dialogue at 20130626130824
...begin dialogue at 20130626130824
...end dialogue at 20130626130826
..answered at 20130626130826.
-> decided to retry.
UPGRADEPHASE RUN_RSPTBFIL_PREP
...started at 20130626130826
# Phase log file: 'RSPTBINI.LOG'
..finished at 20130626130832 with SEVERE ERROR(S).
...begin dialogue at 20130626130832
...end dialogue at 20130626131035
...begin dialogue at 20130626131035
...end dialogue at 20130626131037
..answered at 20130626131037.
-> decided to retry.
UPGRADEPHASE RUN_RSPTBFIL_PREP
...started at 20130626131037
# Phase log file: 'RSPTBINI.LOG'
..finished at 20130626131042 with SEVERE ERROR(S).
...begin dialogue at 20130626131042
...end dialogue at 20130626131044
...begin dialogue at 20130626131044
...end dialogue at 20130626132102
..answered at 20130626132102.
-> decided to retry.
UPGRADEPHASE RUN_RSPTBFIL_PREP
...started at 20130626132102
# Phase log file: 'RSPTBINI.LOG'
..finished at 20130626132107 with SEVERE ERROR(S).
...begin dialogue at 20130626132107
...end dialogue at 20130626133812
...begin dialogue at 20130626133812
...end dialogue at 20130626133815
..answered at 20130626133815.
-> decided to retry.
UPGRADEPHASE RUN_RSPTBFIL_PREP
...started at 20130626133815
# Phase log file: 'RSPTBINI.LOG'
..finished at 20130626133820 with SEVERE ERROR(S).
...begin dialogue at 20130626133820
...end dialogue at 20130626134421
...begin dialogue at 20130626134421
...end dialogue at 20130626134423
..answered at 20130626134423.
-> decided to retry.
UPGRADEPHASE RUN_RSPTBFIL_PREP
...started at 20130626134423
# Phase log file: 'RSPTBINI.LOG'
..finished at 20130626134428 with SEVERE ERROR(S).
...begin dialogue at 20130626134428
...end dialogue at 20130626134657
...begin dialogue at 20130626134657
...end dialogue at 20130626134659
..answered at 20130626134659.
-> decided to retry.
UPGRADEPHASE RUN_RSPTBFIL_PREP
...started at 20130626134659
# Phase log file: 'RSPTBINI.LOG'
..finished at 20130626134704 with SEVERE ERROR(S).
...begin dialogue at 20130626134704
...end dialogue at 20130626135254
...CANCELED at 20130626135254.
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup version 7.00/3 patch level 25.026.
# Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
# Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20130626135305
...end dialogue at 20130626135309
...STARTED at 20130626135309.
# Environment for SAPup:
# SAPSID = PRD
# SAPHOST = MCVPRDDB
# STARTPATH = C:\usr\sap\PRD\SYS\exe\run
# KERNPATH = C:\usr\sap\PRD\SYS\exe\run
# PROFPATH = C:\usr\sap\PRD\SYS\profile
# LOCAL SLOG = C:\usr\sap\PRD\DVEBMGS30\log\SLOG30.LOG
# LOCAL SLOG (OLD) = C:\usr\sap\PRD\DVEBMGS30\log\SLOGO30.LOG
# CENTRAL SLOG =
# CENTRAL SLOG (OLD) =
# EPS INBOX = \\MCVPRDDB\sapmnt\trans\EPS\in
# EPS ROOT = \\MCVPRDDB\sapmnt\trans\EPS
# DBASID = PRD
# DBAHOST = MCVPRDDB
# DBAPWD = <NOT REPORTED>
# NR R3TRANS = 5
# NR R3LOAD = 1
# IMPORT DESTTIME = 86400
# STARTR3 = "startsap.exe"
# STARTPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STOPR3 = "stopsap.exe"
# STOPPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STARTDB = ""
# STARTPARAMS DB = " "
# STOPDB = ""
# STOPPARAMS DB = " "
# UPGRADE USER = prdadm
# UPGRADE LANGUAGE = E
# SLOGNAME = SLOG700
# ALOGNAME = ALOG700
# SYSNUM = 30
# PROFNAME = C:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS30_MCVPRDDB
# DDIC PWD = <NOT REPORTED>
# GATEWAY HOST = MCVPRDDB
# GATEWAY SERVICE = sapgw30
# MS INTERNAL SERVICE = 3930
# SLOW SHADOW IMPORT = Y
# MAX BUFREFTIME = 120
# BATCH HOST = MCVPRDDB
# NR BTC-PROCS INTERN = 3
# CUSTOMER GENERATION = 0
# SAP START PROFILE = START_DVEBMGS30_MCVPRDDB
# DEFPROFNAME = C:\usr\sap\PRD\SYS\profile\DEFAULT.PFL
# OSTYPE = Windows NT X86_64
# OSVERS = 5.2
# DESTVERS = 700
# COMPDESTVERS = EA-APPL=600,EA-DFPS=600,EA-FINSERV=600,EA-GLTRADE=600,EA-HR=600,EA-IPPE=400,EA-PS=600,EA-RETAIL=600,ECC-DIMP=600,ERECRUIT=600,FI-CA=600,FI-CAX=600,FINBASIS=600,INSURANCE=600,IS-CWM=600,IS-H=600,IS-M=600,IS-OIL=600,IS-PS-CA=600,IS-UT=600,LSOFE=600,PI_BASIS=2005_1_700,SAP_ABA=700,SAP_AP=700,SAP_APPL=600,SAP_BASIS=700,SAP_BW=700,SAP_HR=600,SEM-BW=600,ST-PI=2005_1_700
# SUBSTSTVERS = 700
# COMPSUBSTSTVERS = SAP_BASIS=700,SAP_ABA=700,SAP_APPL=600,SAP_HR=600,SAP_BW=700
# DESTPRODSHORTID = R/3
# DESTPRODSHORTREL = 700
# IMPORT LANGUAGES =
# DB REPSWITCH PAR = NOT_SPECIFIED
# PARALLEL DDLNTABS = 0
# TABLSIZE = 0
# KERNEL BIT SELECTION = 64 bit, no choice
# SHD INSTANCE NUMBER =
# SHD send d talk port = -1
# SHD send d listen port = -1
# SHD collect d listen port = -1
# SHD collect d talk port = -1
# SHD GW SERVICE =
# SHD MS INTERNAL SERVICE =
# SHD HOST =
# SHD GW HOST =
# SHD STARTPATH =
# SHD R3 START PROFILE =
# SHD PROFILE PATH =
# SHD PROFILE NAME =
# SHD startsap =
# SHD stopsap =
# SHD workpath =
# SHD kernpath =
# dba schema = dbo
# dba shd schema = dbo_shd
# connect env string = dbs_mss_schema
# REMOTE UPGRADE DIRECTORY =
# SAP SERVICE ACCOUNT = MCV-EG.COM\SAPServicePRD
# SAP SERVICE ACCOUNT PWD= <NOT REPORTED>
# Original shadow profile =
...begin dialogue at 20130626135313
...end dialogue at 20130626135317
...begin dialogue at 20130626135317
...end dialogue at 20130626135322
...begin dialogue at 20130626135322
...end dialogue at 20130626135325
...begin dialogue at 20130626135325
...end dialogue at 20130626135329
...begin dialogue at 20130626135329
...end dialogue at 20130626135331
Execution of PREPARE module Import begins at 20130626135331
UPGRADEPHASE
UPGRADEPHASE REQIMPORT
...started at 20130626135331
# Condition level 1, total => FALSE '#if "MSSQL" == "SAPDB"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB2-z/OS"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB2/400"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB6"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "INFORMIX"' => FALSE
# Condition level 1, total => TRUE '#elseif "MSSQL" == "MSSQL"' => TRUE
# Condition level 1, total => FALSE '#if "Windows NT X86_64" ~= "Linux"' => FALSE
# Condition level 1, total => FALSE '#elseif "Windows NT X86_64" ~= "Windows NT INTEL"' => FALSE
# Condition level 1, total => FALSE '#elseif "Windows NT X86_64" ~= "Windows NT IA64"' => FALSE
# Condition level 1, total => TRUE '#elseif "Windows NT X86_64" ~= "Windows NT X86_64"' => TRUE
...begin dialogue at 20130626135331
...end dialogue at 20130626135332
..finished at 20130626135333 with status SUCCEEDED.
UPGRADEPHASE READDATA
...started at 20130626135333
# Condition level 1, total => FALSE '#if 0' => FALSE
# Condition level 1, total => FALSE '#if ( 1 >= 0 ) && ( 1 <= 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( 1 >= 0 ) && ( 1 <= 0 )' => FALSE
# Condition level 1, total => TRUE '#if ( 0 == 0 ) && ("200" == "200")' => TRUE
# Condition level 1, total => FALSE '#if ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#elseif ( -1 >= 0 ) && ( -1 <= 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( 0 == 0 ) && ("200" == "110")' => FALSE
# Condition level 1, total => FALSE '#if ( 1 >= 0 ) && ( 1 <= 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( 1 >= 0 ) && ( 1 <= 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "0" == "1" )' => FALSE
# Condition level 1, total => FALSE '#if ( "0" == "1" )' => FALSE
# Info: data from toc file "MISCS1.TOC" extracted in the past
# Info: data from toc file "MISCS4.TOC" extracted in the past
..finished at 20130626135333 with status SUCCEEDED.
UPGRADEPHASE READDATA_EXT
...started at 20130626135333
# Info: data from toc file "MISCEXT1.TOC" extracted in the past
..finished at 20130626135333 with status SUCCEEDED.
UPGRADEPHASE TOOLFIX_CHK
...started at 20130626135333
# Phase log file: 'TOOLFIXCHK.LOG'
Correction package found
Correction package extracted
# TOOLFIX VERSION: 58
# TOOLFIX NAME: FIX_ERP2005SR3
# TOOLFIX DATE: 2013-4-16
..finished at 20130626135336 with status SUCCEEDED.
UPGRADEPHASE CPYFIL0_CBU
...started at 20130626135336
# Phase skipped due to condition 'CBU_only'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626135336 with status SUCCEEDED.
UPGRADEPHASE EXEC_CPYFIL1_CBU
...started at 20130626135336
# Phase skipped due to condition 'CBU_only'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626135336 with status SUCCEEDED.
UPGRADEPHASE FRP_CHK
...started at 20130626135336
# Phase skipped due to condition 'destcomponent=SCM'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626135336 with status SUCCEEDED.
UPGRADEPHASE UNICODELIB_CHK1
...started at 20130626135336
# Phase skipped due to condition 'UNICODE_only'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626135336 with status SUCCEEDED.
UPGRADEPHASE CNV_CHK_IMP
...started at 20130626135336
..finished at 20130626135337 with status SUCCEEDED.
UPGRADEPHASE ICNVCHK_IMP
...started at 20130626135337
# Phase log file: 'ICNVCHK.LOG'
..finished at 20130626135339 with status SUCCEEDED.
UPGRADEPHASE SCRIPT_CHK_TOOL3
...started at 20130626135339
# Phase skipped due to condition ST_range '*-31Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626135339 with status SUCCEEDED.
UPGRADEPHASE SCRIPT_CHK_TOOL4
...started at 20130626135339
# Phase log file: 'SCRIPTCHK.LOG'
..finished at 20130626135340 with status SUCCEEDED.
UPGRADEPHASE SCRIPT2_TST_RESTART
...started at 20130626135340
# Phase log file: 'SCRTREST.LOG'
..finished at 20130626135342 with status SUCCEEDED.
UPGRADEPHASE TRBATCHK_IMP
...started at 20130626135342
..finished at 20130626135342 with status SUCCEEDED.
UPGRADEPHASE CLNT_CHK_IMP
...started at 20130626135342
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
..finished at 20130626135348 with status SUCCEEDED.
UPGRADEPHASE INTCHK_IMP
...started at 20130626135348
..finished at 20130626135349 with status SUCCEEDED.
UPGRADEPHASE SPACECHK_IMP
...started at 20130626135350
# Phase log file: 'DBFPREP.LOG'
# Condition level 1, total => TRUE '#if 0 < 2' => TRUE
..finished at 20130626135350 with status SUCCEEDED.
UPGRADEPHASE PATCH_CHK2
...started at 20130626135350
# PATCHLEVEL OF "ABA_PLUS" = 15
# PATCHLEVEL OF "EA-APPL" = 9
# PATCHLEVEL OF "EA-DFPS" = 9
# PATCHLEVEL OF "EA-FINSERV" = 9
# PATCHLEVEL OF "EA-GLTRADE" = 9
# PATCHLEVEL OF "EA-HR" = 30
# PATCHLEVEL OF "EA-IPPE" = 17
# PATCHLEVEL OF "EA-PS" = 9
# PATCHLEVEL OF "EA-RETAIL" = 0
# PATCHLEVEL OF "PI" = 9
# PATCHLEVEL OF "PI_BASIS" = 7
# PATCHLEVEL OF "ST-A/PI" = 0
# PATCHLEVEL OF "ST-PI" = 7
# PATCHLEVEL OF "SAP_APPL" = 33
# PATCHLEVEL OF "SAP_HR" = 49
# PATCHLEVEL OF "SAP_BW" = 0
# PATCHLEVEL OF "SAP_APO" = 0
# PATCHLEVEL OF "SAP_BASIS" = 67
# PATCHLEVEL OF "SAP_ABA" = 67
# PATCHLEVEL OF "BBPCRM" = 0
# PATCHLEVEL OF "SCR" = 0
..finished at 20130626135357 with status SUCCEEDED.
UPGRADEPHASE NTHISTCRE
...started at 20130626135357
# Phase skipped due to condition ST_range '*-40B'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626135357 with status SUCCEEDED.
UPGRADEPHASE ALTER_TO
...started at 20130626135357
..finished at 20130626135403 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPD1
...started at 20130626135403
# Phase skipped due to condition ST_range '30D-31Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626135403 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPD2
...started at 20130626135403
# Phase skipped due to condition ST_range '40A-40Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626135404 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPD3
...started at 20130626135404
# Phase skipped due to condition ST_range '45A-46Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626135404 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPD4
...started at 20130626135404
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB6" ) && ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) ' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
...begin processing at 20130626135405
...tp-pid 6948
..finished at 20130626135715 with status SUCCEEDED.
UPGRADEPHASE MVNTAB_TOOL
...started at 20130626135715
# Phase log file: 'MVNTTOOL.LOG'
..finished at 20130626140132 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPI
...started at 20130626140132
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB6" ) && ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) ' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
...begin processing at 20130626140134
...tp-pid 5804
..finished at 20130626142157 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPM
...started at 20130626142407
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB6" ) && ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) ' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
...begin processing at 20130626142408
...tp-pid 6568
..finished at 20130626142426 with status SUCCEEDED.
UPGRADEPHASE TOOLIMP4_UCMIG
...started at 20130626142426
# Phase skipped due to condition ST_range '46C-46Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626142426 with status SUCCEEDED.
UPGRADEPHASE TOOLIMP4_FIX
...started at 20130626142426
# Phase skipped due to condition ST_range '*-46Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626142426 with status SUCCEEDED.
UPGRADEPHASE TOOLIMP6_FIX
...started at 20130626142426
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB6" ) && ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) ' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
...begin processing at 20130626142427
...tp-pid 7108
..finished at 20130626142452 with status SUCCEEDED.
UPGRADEPHASE NPREPCRE0
...started at 20130626142452
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB6" ) && ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) ' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
...begin processing at 20130626142453
...tp-pid 6596
..finished at 20130626143921 with status SUCCEEDED.
UPGRADEPHASE JOB_RSUVSAVE
...started at 20130626143921
# Phase log file: 'PSUVSAVE.LOG'
..finished at 20130626143927 with status SUCCEEDED.
UPGRADEPHASE UVERS_PREIMP
...started at 20130626143928
..finished at 20130626143928 with status SUCCEEDED.
UPGRADEPHASE UVERS_INIT
...started at 20130626143928
..finished at 20130626143931 with status SUCCEEDED.
UPGRADEPHASE SQLDB_UVERS_INIT
...started at 20130626143931
# Phase skipped due to condition ST_range '*-46A'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626143931 with status SUCCEEDED.
UPGRADEPHASE UVERS_CHK_IMP
...started at 20130626143931
# Phase log file: 'UVERSCHK_IMP.LOG'
..finished at 20130626143931 with status SUCCEEDED.
UPGRADEPHASE BATCHCHK_IMP
...started at 20130626143931
# Phase log file: 'BATCHCHK_IMP.LOG'
..finished at 20130626143937 with status SUCCEEDED.
UPGRADEPHASE SQLDB_UCMIG
...started at 20130626143937
# Phase skipped due to condition 'UCMIG_INTEGRATED'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626143937 with status SUCCEEDED.
UPGRADEPHASE UCMIG_STATUS_SET0
...started at 20130626143937
# Phase skipped due to condition 'UCMIG_INTEGRATED'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626143937 with status SUCCEEDED.
UPGRADEPHASE JOB_RSCVINIT
...started at 20130626143938
# Phase log file: 'PSCVINIT.LOG'
..finished at 20130626143943 with status SUCCEEDED.
UPGRADEPHASE RUN_RSPTBFIL_PREP
...started at 20130626143943
# Phase log file: 'RSPTBINI.LOG'
..finished at 20130626143950 with SEVERE ERROR(S).
...begin dialogue at 20130626143950
...end dialogue at 20130626155951
...begin dialogue at 20130626155951
...end dialogue at 20130626155953
..answered at 20130626155953.
-> decided to retry.
UPGRADEPHASE RUN_RSPTBFIL_PREP
...started at 20130626155953
# Phase log file: 'RSPTBINI.LOG'
..finished at 20130626155959 with SEVERE ERROR(S).
...begin dialogue at 20130626155959
...end dialogue at 20130626162011
...begin dialogue at 20130626162011
...end dialogue at 20130626162014
..answered at 20130626162014.
-> decided to retry.
UPGRADEPHASE RUN_RSPTBFIL_PREP
...started at 20130626162014
# Phase log file: 'RSPTBINI.LOG'
..finished at 20130626162018 with SEVERE ERROR(S).
...begin dialogue at 20130626162018
...end dialogue at 20130626162547
...begin dialogue at 20130626162547
...end dialogue at 20130626162550
..answered at 20130626162550.
-> decided to retry.
UPGRADEPHASE RUN_RSPTBFIL_PREP
...started at 20130626162550
# Phase log file: 'RSPTBINI.LOG'
..finished at 20130626162555 with SEVERE ERROR(S).
...begin dialogue at 20130626162555
...end dialogue at 20130626163148
...begin dialogue at 20130626163148
...end dialogue at 20130626163149
..answered at 20130626163149.
-> decided to exit.
...CANCELED at 20130626163149.
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup version 7.00/3 patch level 25.026.
# Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
# Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
# Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20130626163156
...end dialogue at 20130626163157
...STARTED at 20130626163157.
# Environment for SAPup:
# SAPSID = PRD
# SAPHOST = MCVPRDDB
# STARTPATH = C:\usr\sap\PRD\SYS\exe\run
# KERNPATH = C:\usr\sap\PRD\SYS\exe\run
# PROFPATH = C:\usr\sap\PRD\SYS\profile
# LOCAL SLOG = C:\usr\sap\PRD\DVEBMGS30\log\SLOG30.LOG
# LOCAL SLOG (OLD) = C:\usr\sap\PRD\DVEBMGS30\log\SLOGO30.LOG
# CENTRAL SLOG =
# CENTRAL SLOG (OLD) =
# EPS INBOX = \\MCVPRDDB\sapmnt\trans\EPS\in
# EPS ROOT = \\MCVPRDDB\sapmnt\trans\EPS
# DBASID = PRD
# DBAHOST = MCVPRDDB
# DBAPWD = <NOT REPORTED>
# NR R3TRANS = 5
# NR R3LOAD = 1
# IMPORT DESTTIME = 86400
# STARTR3 = "startsap.exe"
# STARTPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STOPR3 = "stopsap.exe"
# STOPPARAMS R3 = "name=PRD nr=30 SAPDIAHOST=MCVPRDDB"
# STARTDB = ""
# STARTPARAMS DB = " "
# STOPDB = ""
# STOPPARAMS DB = " "
# UPGRADE USER = prdadm
# UPGRADE LANGUAGE = E
# SLOGNAME = SLOG700
# ALOGNAME = ALOG700
# SYSNUM = 30
# PROFNAME = C:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS30_MCVPRDDB
# DDIC PWD = <NOT REPORTED>
# GATEWAY HOST = MCVPRDDB
# GATEWAY SERVICE = sapgw30
# MS INTERNAL SERVICE = 3930
# SLOW SHADOW IMPORT = Y
# MAX BUFREFTIME = 120
# BATCH HOST = MCVPRDDB
# NR BTC-PROCS INTERN = 3
# CUSTOMER GENERATION = 0
# SAP START PROFILE = START_DVEBMGS30_MCVPRDDB
# DEFPROFNAME = C:\usr\sap\PRD\SYS\profile\DEFAULT.PFL
# OSTYPE = Windows NT X86_64
# OSVERS = 5.2
# DESTVERS = 700
# COMPDESTVERS = EA-APPL=600,EA-DFPS=600,EA-FINSERV=600,EA-GLTRADE=600,EA-HR=600,EA-IPPE=400,EA-PS=600,EA-RETAIL=600,ECC-DIMP=600,ERECRUIT=600,FI-CA=600,FI-CAX=600,FINBASIS=600,INSURANCE=600,IS-CWM=600,IS-H=600,IS-M=600,IS-OIL=600,IS-PS-CA=600,IS-UT=600,LSOFE=600,PI_BASIS=2005_1_700,SAP_ABA=700,SAP_AP=700,SAP_APPL=600,SAP_BASIS=700,SAP_BW=700,SAP_HR=600,SEM-BW=600,ST-PI=2005_1_700
# SUBSTSTVERS = 700
# COMPSUBSTSTVERS = SAP_BASIS=700,SAP_ABA=700,SAP_APPL=600,SAP_HR=600,SAP_BW=700
# DESTPRODSHORTID = R/3
# DESTPRODSHORTREL = 700
# IMPORT LANGUAGES =
# DB REPSWITCH PAR = NOT_SPECIFIED
# PARALLEL DDLNTABS = 0
# TABLSIZE = 0
# KERNEL BIT SELECTION = 64 bit, no choice
# SHD INSTANCE NUMBER =
# SHD send d talk port = -1
# SHD send d listen port = -1
# SHD collect d listen port = -1
# SHD collect d talk port = -1
# SHD GW SERVICE =
# SHD MS INTERNAL SERVICE =
# SHD HOST =
# SHD GW HOST =
# SHD STARTPATH =
# SHD R3 START PROFILE =
# SHD PROFILE PATH =
# SHD PROFILE NAME =
# SHD startsap =
# SHD stopsap =
# SHD workpath =
# SHD kernpath =
# dba schema = dbo
# dba shd schema = dbo_shd
# connect env string = dbs_mss_schema
# REMOTE UPGRADE DIRECTORY =
# SAP SERVICE ACCOUNT = MCV-EG.COM\SAPServicePRD
# SAP SERVICE ACCOUNT PWD= <NOT REPORTED>
# Original shadow profile =
...begin dialogue at 20130626163201
...end dialogue at 20130626163203
...begin dialogue at 20130626163203
...end dialogue at 20130626163206
...begin dialogue at 20130626163206
...end dialogue at 20130626163208
...begin dialogue at 20130626163208
...end dialogue at 20130626163214
...begin dialogue at 20130626163214
...end dialogue at 20130626163217
Execution of PREPARE module Import begins at 20130626163217
UPGRADEPHASE
UPGRADEPHASE REQIMPORT
...started at 20130626163217
# Condition level 1, total => FALSE '#if "MSSQL" == "SAPDB"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB2-z/OS"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB2/400"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "DB6"' => FALSE
# Condition level 1, total => FALSE '#elseif "MSSQL" == "INFORMIX"' => FALSE
# Condition level 1, total => TRUE '#elseif "MSSQL" == "MSSQL"' => TRUE
# Condition level 1, total => FALSE '#if "Windows NT X86_64" ~= "Linux"' => FALSE
# Condition level 1, total => FALSE '#elseif "Windows NT X86_64" ~= "Windows NT INTEL"' => FALSE
# Condition level 1, total => FALSE '#elseif "Windows NT X86_64" ~= "Windows NT IA64"' => FALSE
# Condition level 1, total => TRUE '#elseif "Windows NT X86_64" ~= "Windows NT X86_64"' => TRUE
...begin dialogue at 20130626163217
...end dialogue at 20130626163225
..finished at 20130626163225 with status SUCCEEDED.
UPGRADEPHASE READDATA
...started at 20130626163226
# Condition level 1, total => FALSE '#if 0' => FALSE
# Condition level 1, total => FALSE '#if ( 1 >= 0 ) && ( 1 <= 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( 1 >= 0 ) && ( 1 <= 0 )' => FALSE
# Condition level 1, total => TRUE '#if ( 0 == 0 ) && ("200" == "200")' => TRUE
# Condition level 1, total => FALSE '#if ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#elseif ( -1 >= 0 ) && ( -1 <= 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( 0 == 0 ) && ("200" == "110")' => FALSE
# Condition level 1, total => FALSE '#if ( 1 >= 0 ) && ( 1 <= 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( 1 >= 0 ) && ( 1 <= 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "0" == "1" )' => FALSE
# Condition level 1, total => FALSE '#if ( "0" == "1" )' => FALSE
# Info: data from toc file "MISCS1.TOC" extracted in the past
# Info: data from toc file "MISCS4.TOC" extracted in the past
..finished at 20130626163226 with status SUCCEEDED.
UPGRADEPHASE READDATA_EXT
...started at 20130626163226
# Info: data from toc file "MISCEXT1.TOC" extracted in the past
..finished at 20130626163226 with status SUCCEEDED.
UPGRADEPHASE TOOLFIX_CHK
...started at 20130626163226
# Phase log file: 'TOOLFIXCHK.LOG'
Correction package found
Correction package extracted
# TOOLFIX VERSION: 58
# TOOLFIX NAME: FIX_ERP2005SR3
# TOOLFIX DATE: 2013-4-16
..finished at 20130626163229 with status SUCCEEDED.
UPGRADEPHASE CPYFIL0_CBU
...started at 20130626163229
# Phase skipped due to condition 'CBU_only'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626163229 with status SUCCEEDED.
UPGRADEPHASE EXEC_CPYFIL1_CBU
...started at 20130626163229
# Phase skipped due to condition 'CBU_only'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626163229 with status SUCCEEDED.
UPGRADEPHASE FRP_CHK
...started at 20130626163229
# Phase skipped due to condition 'destcomponent=SCM'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626163229 with status SUCCEEDED.
UPGRADEPHASE UNICODELIB_CHK1
...started at 20130626163229
# Phase skipped due to condition 'UNICODE_only'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626163229 with status SUCCEEDED.
UPGRADEPHASE CNV_CHK_IMP
...started at 20130626163229
..finished at 20130626163230 with status SUCCEEDED.
UPGRADEPHASE ICNVCHK_IMP
...started at 20130626163230
# Phase log file: 'ICNVCHK.LOG'
..finished at 20130626163231 with status SUCCEEDED.
UPGRADEPHASE SCRIPT_CHK_TOOL3
...started at 20130626163232
# Phase skipped due to condition ST_range '*-31Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626163232 with status SUCCEEDED.
UPGRADEPHASE SCRIPT_CHK_TOOL4
...started at 20130626163232
# Phase log file: 'SCRIPTCHK.LOG'
..finished at 20130626163233 with status SUCCEEDED.
UPGRADEPHASE SCRIPT2_TST_RESTART
...started at 20130626163233
# Phase log file: 'SCRTREST.LOG'
..finished at 20130626163234 with status SUCCEEDED.
UPGRADEPHASE TRBATCHK_IMP
...started at 20130626163235
..finished at 20130626163235 with status SUCCEEDED.
UPGRADEPHASE CLNT_CHK_IMP
...started at 20130626163235
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
# Condition level 1, total => TRUE '#if 1 >= 0' => TRUE
..finished at 20130626163241 with status SUCCEEDED.
UPGRADEPHASE INTCHK_IMP
...started at 20130626163241
..finished at 20130626163243 with status SUCCEEDED.
UPGRADEPHASE SPACECHK_IMP
...started at 20130626163243
# Phase log file: 'DBFPREP.LOG'
# Condition level 1, total => TRUE '#if 0 < 2' => TRUE
..finished at 20130626163244 with status SUCCEEDED.
UPGRADEPHASE PATCH_CHK2
...started at 20130626163244
# PATCHLEVEL OF "ABA_PLUS" = 15
# PATCHLEVEL OF "EA-APPL" = 9
# PATCHLEVEL OF "EA-DFPS" = 9
# PATCHLEVEL OF "EA-FINSERV" = 9
# PATCHLEVEL OF "EA-GLTRADE" = 9
# PATCHLEVEL OF "EA-HR" = 30
# PATCHLEVEL OF "EA-IPPE" = 17
# PATCHLEVEL OF "EA-PS" = 9
# PATCHLEVEL OF "EA-RETAIL" = 0
# PATCHLEVEL OF "PI" = 9
# PATCHLEVEL OF "PI_BASIS" = 7
# PATCHLEVEL OF "ST-A/PI" = 0
# PATCHLEVEL OF "ST-PI" = 7
# PATCHLEVEL OF "SAP_APPL" = 33
# PATCHLEVEL OF "SAP_HR" = 49
# PATCHLEVEL OF "SAP_BW" = 0
# PATCHLEVEL OF "SAP_APO" = 0
# PATCHLEVEL OF "SAP_BASIS" = 67
# PATCHLEVEL OF "SAP_ABA" = 67
# PATCHLEVEL OF "BBPCRM" = 0
# PATCHLEVEL OF "SCR" = 0
..finished at 20130626163250 with status SUCCEEDED.
UPGRADEPHASE NTHISTCRE
...started at 20130626163250
# Phase skipped due to condition ST_range '*-40B'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626163250 with status SUCCEEDED.
UPGRADEPHASE ALTER_TO
...started at 20130626163250
..finished at 20130626163257 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPD1
...started at 20130626163257
# Phase skipped due to condition ST_range '30D-31Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626163257 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPD2
...started at 20130626163257
# Phase skipped due to condition ST_range '40A-40Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626163257 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPD3
...started at 20130626163257
# Phase skipped due to condition ST_range '45A-46Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626163257 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPD4
...started at 20130626163257
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB6" ) && ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) ' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
...begin processing at 20130626163258
...tp-pid 7452
..finished at 20130626163600 with status SUCCEEDED.
UPGRADEPHASE MVNTAB_TOOL
...started at 20130626163600
# Phase log file: 'MVNTTOOL.LOG'
..finished at 20130626164013 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPI
...started at 20130626164013
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB6" ) && ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) ' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
...begin processing at 20130626164014
...tp-pid 212
..finished at 20130626170040 with status SUCCEEDED.
UPGRADEPHASE TOOLIMPM
...started at 20130626170250
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB6" ) && ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) ' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
...begin processing at 20130626170308
...tp-pid 7540
..finished at 20130626170332 with status SUCCEEDED.
UPGRADEPHASE TOOLIMP4_UCMIG
...started at 20130626170332
# Phase skipped due to condition ST_range '46C-46Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626170332 with status SUCCEEDED.
UPGRADEPHASE TOOLIMP4_FIX
...started at 20130626170332
# Phase skipped due to condition ST_range '*-46Z'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626170332 with status SUCCEEDED.
UPGRADEPHASE TOOLIMP6_FIX
...started at 20130626170332
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB6" ) && ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) ' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
...begin processing at 20130626170333
...tp-pid 788
..finished at 20130626170357 with status SUCCEEDED.
UPGRADEPHASE NPREPCRE0
...started at 20130626170357
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB6" ) && ( 1 == 0 )' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "DB2-z/OS" ) ' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
# Condition level 1, total => FALSE '#if ( "MSSQL" == "SAPDB") && ( 1 == 0)' => FALSE
...begin processing at 20130626170357
...tp-pid 3412
..finished at 20130626171818 with status SUCCEEDED.
UPGRADEPHASE JOB_RSUVSAVE
...started at 20130626171818
# Phase log file: 'PSUVSAVE.LOG'
..finished at 20130626171825 with status SUCCEEDED.
UPGRADEPHASE UVERS_PREIMP
...started at 20130626171825
..finished at 20130626171825 with status SUCCEEDED.
UPGRADEPHASE UVERS_INIT
...started at 20130626171825
..finished at 20130626171829 with status SUCCEEDED.
UPGRADEPHASE SQLDB_UVERS_INIT
...started at 20130626171829
# Phase skipped due to condition ST_range '*-46A'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626171829 with status SUCCEEDED.
UPGRADEPHASE UVERS_CHK_IMP
...started at 20130626171829
# Phase log file: 'UVERSCHK_IMP.LOG'
..finished at 20130626171829 with status SUCCEEDED.
UPGRADEPHASE BATCHCHK_IMP
...started at 20130626171829
# Phase log file: 'BATCHCHK_IMP.LOG'
..finished at 20130626171835 with status SUCCEEDED.
UPGRADEPHASE SQLDB_UCMIG
...started at 20130626171835
# Phase skipped due to condition 'UCMIG_INTEGRATED'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626171835 with status SUCCEEDED.
UPGRADEPHASE UCMIG_STATUS_SET0
...started at 20130626171835
# Phase skipped due to condition 'UCMIG_INTEGRATED'
# Skipping over to next phase, nothing to do for this system.
..finished at 20130626171835 with status SUCCEEDED.
UPGRADEPHASE JOB_RSCVINIT
...started at 20130626171835
# Phase log file: 'PSCVINIT.LOG'
..finished at 20130626171841 with status SUCCEEDED.
UPGRADEPHASE RUN_RSPTBFIL_PREP
...started at 20130626171841
# Phase log file: 'RSPTBINI.LOG'
..finished at 20130626171848 with SEVERE ERROR(S).
...begin dialogue at 20130626171848
Hello
The SUM tool is scans the upgrade directory where you have put all the files for the EHP6 upgrade along with the stack file you have generated.
The phase you are right now is doing this and it failed with the above error.
Possible causes are files which are required for the upgrade are either missing or corrupted.
Go to the log directory /tmp/SUM_AIX/SUM/abap/log and check ALL the most recent logs.
I can see that you are using the /tmp file system for the upgrade which I don't personally recommend for any upgrade activity.
If SUM_AIX is a directory created under the /tmp file system you need to make sure that the /tmp file system is sufficiently large enough to complete the upgrade activity. Check the size of the /tmp file system.
If you need assistance you need to provide the recent logs generated by the upgrade tool from the log location.
Regards
RB
Hello
The SUM tool is scans the upgrade directory where you have put all the files for the EHP6 upgrade along with the stack file you have generated.
The phase you are right now is doing this and it failed with the above error.
Possible causes are files which are required for the upgrade are either missing or corrupted.
Go to the log directory /tmp/SUM_AIX/SUM/abap/log and check ALL the most recent logs.
I can see that you are using the /tmp file system for the upgrade which I don't personally recommend for any upgrade activity.
If SUM_AIX is a directory created under the /tmp file system you need to make sure that the /tmp file system is sufficiently large enough to complete the upgrade activity. Check the size of the /tmp file system.
If you need assistance you need to provide the recent logs generated by the upgrade tool from the log location.
Regards
RB
Dear paul,
Yes there's something error in previous phase
I do something manually, RSPTBFIL cannot fill PUTTB_SHD & PUTTB tables,
Then we create it and continue phases.
any ideas?
Hi Samy,
since RSPTBFIL didnt run and so PUTTB was not populated, it would be best to start the upgrade over to ensure everything in consistent and in the proper state for the upgrade. Losing a little time by starting prepare over may save time and prevent larger issues later on during downtime phases.
Sorry, I cannot think of a safe workaround to proceed with the current prepare.
regards,
Paul
Hi,
I think it is better to reset the current upgrade .
Regards, Premsukh
Hi Samy,
did you initialized the phase or did you just continued it? What you can do is to fill these tables by executing the steps manually which normally is triggered by the upgrade. This should only be done after consulting SAP support!
for table PUTTB_SHD:
Report: "RSPTBFIL"
Variant: "SAP_INIT"
for table PUTTB:
Report: "RSPTBFIL"
Variant: "SAP_PRP_PUTTB"
If your tables are emtpy, you have nothing to loose
Regards,
Jens
Hello,
You should use the kernel for your OS/DB . Also make sure you are extracting both parts of the kernel
i.e. DB independent and DB dependent.
check note 19466 for the details on the kernel.
If you still have issues, then check the developer traces from the work directory....dev_* files.
Regards,
Gaurav